Siemens 6AV7613-0AF22-0BJ0 SIMATIC Panel PC 670

Description

The Siemens 6AV7613-0AF22-0BJ0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT display and is powered by a Pentium III 500 MHz processor. It comes equipped with 128 MB of RAM, a 40 GB hard drive for local data storage, and an integrated CD-ROM drive. The system is pre-configured with the Windows NT 4.0 operating system in English and includes a U.S. mains cable for a 115-230V AC power supply.

Features

• 12-inch TFT color display for process visualization.
• Intel Pentium III 500 MHz CPU for control and data processing tasks.
• 128 MB of system RAM.
• 40 GB internal hard drive for operating system and application storage.
• Integrated CD-ROM drive for software installation and data transfer.
• Pre-installed with Windows NT 4.0 (English).
• Supports a wide input voltage range of 115-230V AC.

Applications

• Machine-level operator control and monitoring.
• Process visualization and SCADA client stations.
• Data acquisition and local data logging.
• Factory automation and plant floor control systems.

Technical Specifications

Installation Guidelines

1. 1
   Prepare Panel Cutout: Verify that the mounting cutout in the enclosure or cabinet door matches the required dimensions for the Panel PC 670 chassis. Ensure the mounting surface is clean, flat, and free of debris.
2. 2
   Mount the Unit: Carefully insert the Panel PC into the prepared cutout from the front. Ensure the front bezel gasket is properly seated against the panel surface to maintain the intended environmental seal.
3. 3
   Secure Mounting Clamps: From the rear of the panel, install and tighten the mounting clamps provided with the unit. Apply torque evenly and sequentially to ensure a uniform seal without warping the bezel.
4. 4
   Connect Protective Earth (PE): Connect a dedicated, low-impedance protective earth conductor to the designated grounding terminal on the Panel PC chassis. This is critical for electrical safety and noise immunity.
5. 5
   Connect Power and Peripherals: Connect the mains power cable to a properly rated and protected power source. Connect any required communication cables (e.g., Ethernet, serial) and peripherals (e.g., keyboard, mouse).
6. 6
   Power-Up and Verification: After verifying all connections are secure and correct, remove the LOTO device and re-energize the cabinet. Power on the Panel PC and confirm that the operating system boots correctly and all interfaces are functional.