Siemens 6AV7883-7AG30-6DA0 SIMATIC HMI IPC 477C pro Panel PC

Description

The Siemens 6AV7883-7AG30-6DA0 is a SIMATIC HMI IPC 477C pro Panel PC, engineered for robust performance in industrial settings. This unit features a 19-inch touch display and is housed in a fully sealed enclosure providing complete IP65 protection against dust and water ingress. It is powered by a Core 2 Duo 1.2 GHz processor and includes 4 GB of DDR3 RAM for efficient multitasking. For storage, it is equipped with a 50 GB high-endurance SATA solid-state drive (SSD), pre-installed with Windows XP Professional. Network connectivity is handled by dual 1 Gbit PROFINET (IE) ports, supplemented by four rear-mounted USB interfaces for peripheral devices.

Features

• 19-inch integrated touch screen display
• Fully protected enclosure with an IP65 rating
• Intel Core 2 Duo 1.2 GHz processor
• 4 GB of DDR3 system memory
• 50 GB high-endurance SATA solid-state drive
• Dual 1 Gbit PROFINET (IE) network interfaces
• Four rear-mounted USB ports
• Pre-installed with Windows XP Professional (Multi-Language)

Applications

• Machine-level operator control and monitoring
• Process visualization in manufacturing and production lines
• Data acquisition and logging systems
• SCADA HMI terminals in harsh industrial environments
• Automotive, food and beverage, and packaging industries

Technical Specifications

Installation Guidelines

1.  1  De-energize Equipment: Isolate and lock out all power sources to the control cabinet or mounting location according to established LOTO procedures. Verify the absence of voltage before starting work.
2.  2  Prepare Mounting Location: Ensure the panel cutout or mounting arm is clean, free of burrs, and matches the dimensional requirements for the IPC 477C pro. Verify that the gasket seating surface is smooth and uniform.
3.  3  Mount the Unit: Securely install the Panel PC using all specified mounting clamps or hardware. Tighten fasteners in a cross-pattern sequence to ensure even gasket compression and maintain the IP65 seal integrity.
4.  4  Connect Protective Earth (PE): Connect a low-impedance protective earth conductor from the main cabinet ground to the designated PE terminal on the Panel PC chassis. This is critical for safety and noise immunity.
5.  5  Connect Power and I/O: Connect the main DC power supply. Connect PROFINET network cables using shielded industrial-grade connectors. Connect any required USB peripherals to the rear ports. Ensure all cable glands and connectors are properly sealed.
6.  6  System Commissioning: Remove the lockout/tagout devices and re-apply power to the cabinet. Verify that the Panel PC boots correctly into the Windows operating system and that network communication is established.