Siemens 6ES7647-7BJ40-3XN0 SIMATIC IPC427C Microbox PC

Description

Features

• Processor: CORE2 DUO 1.2 GHz, 800 MHz FSB, 3 MB SLC
• Memory: 4 GBYTE DDR3 1066 SODIMM
• SODIMM Extension (Hardware): Without Extension
• Changeable Drive (Accessible): 4 GB Compact-Flash
• Internal Drive (Not Accessible): Without Internal Drive
• Operating System: Windows Embedded Standard 7 (preinstalled on mass storage, delivered without embedded Windows software)
• Product Type: PC Microbox

Applications

• Machine control and visualization
• Data acquisition and processing
• Human-Machine Interface (HMI) applications
• Embedded control systems
• Distributed control system (DCS) components
• Industrial communication gateways

Technical Specifications

Installation Guidelines

1. De-energize System: Before beginning any installation or maintenance, ensure that all power to the system and associated equipment is completely de-energized and locked out according to safety procedures.
2. Mounting: Securely mount the Microbox PC in a suitable industrial enclosure or panel using the designated mounting hardware. Ensure adequate clearance for ventilation and cable routing.
3. Power Connection: Connect the appropriate industrial power supply to the PC's power input terminals, observing correct polarity and voltage requirements. Verify the power source meets the PC's specifications.
4. Grounding: Establish a proper protective earth (PE) ground connection to the PC chassis to ensure electrical safety and minimize electromagnetic interference.
5. Peripheral Connections: Connect necessary peripherals such as display monitors, keyboards, mice, and network cables to the appropriate ports. Ensure all connections are secure.
6. Environmental Considerations: Install the PC in an environment that adheres to its specified operating temperature, humidity, and vibration limits. Avoid direct exposure to excessive dust, moisture, or corrosive agents.
7. Cable Management: Route all cables neatly and securely, separating power cables from signal cables to prevent interference. Use cable ties and conduits where appropriate.
8. System Startup: After all connections are verified, re-energize the system and observe the PC's startup sequence. Verify proper operation and communication with connected devices.