Siemens 6ES7675-1DK30-2AA0 SIMATIC IPC427C Microbox PC

Description

The Siemens 6ES7675-1DK30-2AA0 is a SIMATIC IPC427C Microbox PC bundle, featuring a Core2 Duo 1.2 GHz processor with an 800 MHz FSB, 2 GByte DDR3 1066 SODIMM RAM, and a 50 GB Solid State drive. It is equipped with 1 x PROFIBUS DP and 2 x Industrial Ethernet (1 Gbit) interfaces. The unit comes with WinCC Flexible 2008 and WinAC software pre-installed, and is configured for Windows Embedded Standard 2009, although it is delivered without the embedded Windows software.

Features

• Core2 Duo 1.2 GHz Processor with 800 MHz FSB
• 2 GByte DDR3 1066 SODIMM RAM
• 50 GB Solid State Storage
• 1 x PROFIBUS DP Interface
• 2 x Industrial Ethernet (1 Gbit) Interfaces
• Pre-installed with WinCC Flexible 2008 and WinAC software
• Configured for Windows Embedded Standard 2009

Applications

The SIMATIC IPC427C Microbox PC is suitable for various industrial automation tasks, including machine control, process visualization, data acquisition, and HMI applications. Its compact design and robust construction make it ideal for deployment in demanding industrial environments where space is limited.

Technical Specifications

Connections / Interfaces

The unit provides the following industrial communication interfaces:

• 1 x PROFIBUS DP
• 2 x Industrial Ethernet (1 Gbit)

Installation Guidelines

1. Mounting: Securely mount the Microbox PC in a suitable industrial enclosure or control cabinet, ensuring adequate ventilation and clearance for cable routing.
2. Power Supply: Connect the unit to a stable and filtered industrial power supply, adhering to specified voltage and current ratings.
3. Grounding: Ensure proper grounding of the Microbox PC and its enclosure to minimize electrical noise and enhance operational safety.
4. Cable Routing: Route communication and power cables separately to prevent interference. Use shielded cables for PROFIBUS DP and Ethernet connections where necessary.
5. Environmental Considerations: Operate the unit within its specified temperature and humidity ranges. Protect it from excessive dust, moisture, and vibration.
6. Initial Setup: Power on the device and verify system boot-up. Configure network settings and application software as required for the specific automation task.