Bently Nevada 990-04-50-02-CN Émetteur de vibration 2 fils

Description

The 990-04-50-02-CN is a loop-powered vibration transmitter designed for converting proximity probe signals into a standardized 4 to 20 mA output for machinery monitoring systems. It is used in rotating equipment applications where vibration needs to be continuously tracked without deploying a full vibration monitoring rack.

This configuration is typically chosen when a bulkhead-mounted installation is preferred over DIN rail mounting. In practical panel design, this is often the case when engineers want the transmitter fixed directly to the enclosure wall for improved mechanical stability or simplified wiring layout.

The device is intended for use with a 3300 NSv proximity probe system and supports a 5.0 meter system length. This makes it suitable for compact to medium-sized rotating machinery installations such as compressors, pumps, and fan assemblies where probe routing remains relatively short and controlled.

From a field engineering perspective, this version is often used when installation rigidity and straightforward panel layout take priority over modular mounting flexibility.

Engineering Characteristics

• 2-wire loop-powered vibration transmitter architecture
• Converts proximity probe displacement into 4–20 mA output
• Designed for 3300 NSv probe system compatibility
• Bulkhead screw mounting for direct enclosure installation
• Integrated signal conditioning electronics
• Stable output for continuous vibration trending
• External zero/span adjustment for calibration
• PROX OUT available for diagnostic signal access
• Fault detection with current drop behavior on signal failure
• Sealed compact industrial housing design

Application Context

Ordering Structure

Environmental Limits

Mechanical Data

Interface Overview

Installation Notes (Field Engineering View)

Bulkhead mounting changes the mechanical behavior of the installation compared to DIN rail versions. In real panel work, this model is usually mounted directly onto the enclosure wall to reduce movement and improve strain resistance on wiring.

Cable routing should be planned to avoid long parallel runs with motor feeders or inverter output cables. This is especially important in compressor and pump packages where electromagnetic noise can distort low-level probe signals.

Before system start-up, probe gap alignment should be verified carefully. After power-up, allow the loop signal to stabilize under steady machine conditions before enabling alarm logic in the control system.

PROX OUT is typically used during commissioning or troubleshooting rather than continuous operation.

FAQ

Why choose bulkhead mounting for this version?
It provides a fixed mechanical installation point directly on the enclosure wall.

Is this compatible with PLC systems?
Yes, it outputs a standard 4–20 mA signal for PLC or DCS inputs.

What probe system does it require?
It is designed for Bently Nevada 3300 NSv proximity probes.

Is this a full diagnostic system?
No, it is intended for vibration trending and basic protection logic.

What is the function of PROX OUT?
It provides raw vibration signal output for diagnostic measurement tools.

What happens if the probe fails?
The output drops to a low-current fault state.

Where is it typically used?
On compressors, pumps, fans, and other rotating machinery.

Does it require external signal conditioning?
No, conditioning is fully integrated into the transmitter.

Is it suitable for skid-mounted equipment?
Yes, especially where rigid enclosure mounting is preferred.

Can it operate in humid environments?
Yes, it is designed for high humidity and condensing conditions.