Bently Nevada 990-05-XX-01-CN MOD : 165335-01 | Transmetteur de vibration 990

Description

The 990-05-XX-01-CN MOD: 165335-01 is a high-reliability, two-wire 990 Vibration Transmitter engineered by Bently Nevada to supply continuous machinery protection monitoring directly to plant control networks. This industrial component integrates the processing circuitry of a standard proximity sensor into a compact field-mount transmitter package. It accepts inputs from a non-contacting 3300 XL 8mm eddy-current proximity probe and extension cable, processing raw high-frequency micro-gap changes into a linear, proportional 4 to 20 mA current output loop. This analog signal interfaces directly with standard Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), or simple process data recorders without requiring a separate rack system monitor.

This precise hardware configuration features a factory-calibrated full-scale measurement option of 0-5 mils pp (0-125 um pp), designed for direct tracking of radial shaft vibration amplitudes. The physical casing comes integrated with 35 mm DIN rail clips to allow fast, secure snap-on mounting into field marshalling junctions. This variant is engineered with the CN agency option, which provides global and local industrial compliance covering ATEX/IECEx and Chinese NEPSI hazardous area safety certifications. The assignment MOD: 165335-01 designates a specialized factory modification code that ensures specific internal processing tweaks or precise component matching parameters tailored to targeted machinery requirements while preserving full base-model compatibility.

Features

• Two-wire loop-powered architecture providing direct 4 to 20 mA analog output integration into host PLC or DCS loops.
• Factory-calibrated full-scale range measuring 0-5 mils peak-to-peak (0-125 um peak-to-peak) for high-accuracy shaft vibration logging.
• Integral 35 mm DIN rail mounting clips allowing rapid, toolless snap-fit structural deployment on enclosure racks.
• Robust hazardous area safety design certified with combined ATEX/IECEx and local Chinese NEPSI industrial markings.
• Dedicated factory configuration label designated under MOD: 165335-01 for precise system architecture synchronization.
• Onboard BNC buffered output connector providing unconditioned dynamic eddy-current waveforms for local machinery diagnostics.
• Built-in non-interacting zero and span adjustments allowing clean precision calibration touch-ups under field conditions.

Applications

• Direct radial vibration tracking on fluid-filmed bearings of industrial centrifugal air compressors and process fans.
• Continuous asset health processing loop monitoring on medium-sized balance-of-plant electric motor or pump skids.
• Distributed, standalone field instrumentation integration on specialized gas or water utility infrastructure pumps.

Option String Breakdown

Technical Specifications

Connections/Interfaces

Installation Guidelines

• DIN Rail Alignment: Position the transmitter housing directly over standard 35 mm DIN rail tracking. Apply firm downward pressure until the integrated plastic clips snap tightly over the rail flanges.
• Chassis Frame Isolation: Ensure the internal ground planes remain isolated from bare electrical conduit paths. The transmitter plate must remain isolated from structural rack frames to eliminate low-voltage ground loops.
• System Length Verification: Verify that the system length option (Option -XX) perfectly matches the combined physical length of the connected 3300 XL 8mm probe and extension cable to maintain proper scaling.
• Dynamic Signal Diagnostic Check: Use the front-facing coaxial BNC connector to patch into local signal analyzers. This buffered port provides a raw voltage wave (200 mV/mil) without altering the primary 4-20 mA control loop tracking.