Contrôle de groupe électrogène Woodward EASYGEN-600

Il ne reste que 5 article(s) en stock

Fabricant : Woodward
N° de produit : EASYGEN-600
Pays d'origine :États-Unis
Type de produit : Contrôle de groupe électrogène
Paiement : Virement bancaire, Western Union
Poids : 2000g
Dimensions : Écran LCD 3,5"
Port d'expédition : Xiamen
Garantie : 12 mois

The Woodward easYgen-600 is a compact and versatile generator set controller designed for single-unit operations. It provides comprehensive monitoring, protection, and control for engine-generator sets, featuring a user-friendly interface and robust power supply tolerance.

Technical Specifications

Category	Specification
Manufacturer	Woodward
Product Series	easYgen-600 Series
Display	3.5" Backlit LCD (132 x 64 pixels)
Operating Voltage	8.0 VDC to 35.0 VDC (Continuous)
Power Consumption	< 3 W (Standby $\le$ 2 W)
Alternator Frequency	50 Hz / 60 Hz
Shipping Weight	2.0 kg

Input & Output Configuration

Feature	Capacity
Digital Input Ports	5
Output Ports	6
Analog Sensors	3
AMF Support	No (Standard Start/Stop control)

Voltage Tolerance & Accuracy

Parameter	Range / Value
Minimum Supply Voltage	6.5 VDC
Maximum Supply Voltage (Long Time)	50 VDC
Maximum Supply Voltage (Short Time)	80 VDC (5–10 s)
Battery Measurement Accuracy	1% (12 V / 24 V systems)

Installation Guidelines

Mounting: The unit is designed for front-panel mounting. Ensure the cutout is precise to maintain the structural integrity of the control cabinet.
Power Supply Wiring: The controller supports a wide DC range (8V to 35V). To ensure the unit remains powered during engine cranking (where voltage drops occur), the 6.5V minimum supply tolerance is critical.
Grounding: Always connect the negative battery terminal directly to the controller's ground terminal using a dedicated wire to prevent electrical noise interference.
Sensor Calibration: When connecting the 3 analog sensors (typically for Oil Pressure, Water Temperature, and Fuel Level), ensure the correct sensor curves are selected in the software to match your physical hardware.

Frequently Asked Questions (FAQs)

What is the difference between the easYgen-600 and the 1600/1800 models?

The easYgen-600 is a standard Start/Stop controller without Automatic Mains Failure (AMF) logic. Higher models in the series typically add AMF capabilities and additional communication ports.

Can this unit be used for both 12V and 24V battery systems?

Yes. The operating range of 8V to 35V DC covers both standard industrial battery voltages, and the measurement accuracy is calibrated for both scales.

What happens if the battery voltage spikes during an alternator fault?

The easYgen-600 features excellent surge protection, capable of withstanding up to 80V for short durations (5–10 seconds) and 50V for longer periods, protecting the internal electronics from damage.

Is the LCD visible in low-light conditions?

Yes, the 3.5" display includes a built-in backlight, ensuring that engine parameters and alarm codes are clearly legible in dark engine rooms or enclosures.

Key Features:

#easYgen-600 Series #Genset Control #Genset Control Module #Single Unit Generator Controller

Expédition express mondiale

Livraison standard : 4 à 6 jours ouvrables via DHL, FedEx et UPS.
Expédition express : Expédition le jour même pour les commandes en stock passées avant 14h00 (GMT+8).
Couverture mondiale : Service dans plus de 150 pays, avec livraison rapide en Arabie Saoudite et aux Émirats arabes unis.

Retours et garantie

Garantie de 30 jours : Retours acceptés pour les produits en stock dans leur emballage d’origine scellé en usine.
Garantie de 12 mois : Chaque composant industriel est couvert par notre garantie technique professionnelle.

Les commandes sont traitées et livrées du lundi au vendredi (hors jours fériés).

Pour connaître les conditions d’éligibilité complètes, les frais de restockage et les détails des retours internationaux, veuillez consulter notre site officiel Politique de remboursement et de retour .