BECKHOFF FC5121 CANopen Master/Slave Card

Only 10 item(s) left in stock

Manufacturer: BECKHOFF
Product No.: FC5121
Country of origin:Németország
Product Type: Fieldbus Cards
Payment: T/T, Western Union
Weight: 500g
Dimensions: appro x . 100 mm x 130 mm
Shipping port: Xiamen
Warranty: 12 months

Description

Integrating PC-based control systems directly with CANopen fieldbus networks, the Beckhoff FC5121 interface card provides a high-performance PCI Express (PCIe) connection for demanding industrial automation environments. This single-channel CANopen master/slave card enables seamless communication between industrial PCs and distributed I/O, drives, or other CANopen-compliant field devices. Operating within the TwinCAT software environment, the module supports both master and slave configurations, offering flexible integration into diverse control architectures without compromising processing speed.

Features

Single-channel CANopen interface designed for standard PCI Express x1 slots.
Supports adjustable data transfer rates ranging from 10 kbaud up to 1000 kbaud.
Galvanically decoupled 9-pin D-sub connection to protect host hardware from voltage spikes.
Integrated, switchable termination resistor for simplified network topology configuration.
Onboard hardware diagnostics via dual LED indicators per channel for rapid status monitoring.
Process image capacity of up to 4 kbytes total input and output data.

Applications

Industrial PC-based automation and control systems.
Distributed I/O and motion control integration in manufacturing lines.
Machine building and factory automation systems requiring CANopen connectivity.
Test benches and real-time simulation environments.

Technical Specifications

Manufacturer	BECKHOFF
Part Number/Model	FC5121
Fieldbus Type	CANopen
PC Interface	PCI Express x1 (PCIe x1)
Number of Channels	1
Data Transfer Rates	10, 20, 50, 100, 125, 250, 500, 800, 1000 kbaud
Bus Interface	1 x D-sub socket, 9-pin, galvanically decoupled
Termination Resistor	Switchable (onboard)
Hardware Diagnostics	2 LEDs per channel
Process Image Bit Width	Max. 4 kbyte input and output data (total)
Operating Temperature	0 to +55 degC
Software Driver	TwinCAT 2.11 R3 and higher
Dimensions	Approx. 100 mm x 130 mm

Connections and Interfaces

Connector Pin	Function / Signal
Pin 2	CAN_L (CAN low bus line)
Pin 3	CAN_GND (CAN ground)
Pin 7	CAN_H (CAN high bus line)
Pin 9	CAN_V+ (Optional external positive supply)
Pins 1, 4, 5, 6, 8	NC (Not connected / Reserved)

Installation Guidelines

Ensure the Industrial PC is completely powered down and disconnected from the main power supply before inserting the card.
Insert the card firmly into a free PCI Express x1 (or higher) slot and secure the bracket to the PC chassis.
Configure the switchable termination resistor depending on the card's position in the CANopen network topology (enable if the card is at the physical end of the bus line).
Use shielded twisted-pair cabling compliant with CANopen standards to minimize electromagnetic interference.
Ground the cable shield at both ends where possible, or according to local electromagnetic compatibility (EMC) guidelines.

Compliance and Certifications

Key Features:

Does the Beckhoff FC5121 support both master and slave modes?

Yes, the FC5121 can be configured as either a CANopen master or a CANopen slave within the TwinCAT environment.

What PC interface slot is required for the FC5121?

The card requires a standard PCI Express (PCIe) x1 slot, but it can also be installed in x4, x8, or x16 PCIe slots.

Is there an integrated termination resistor on the FC5121?

Yes, the card features an onboard, switchable termination resistor that can be enabled or disabled via a physical switch on the card.

Globális expressz szállítás

Normál szállítás: 4-6 munkanap a DHL, FedEx és UPS szolgáltatásával.
Gyors kiszállítás: A raktáron lévő, 14:00 (GMT+8) előtt leadott megrendeléseket aznap feladjuk.
Világszintű lefedettség: Több mint 150 országban szolgálunk ki, beleértve a gyors szállítást Szaúd-Arábiába és az Egyesült Arab Emírségekbe.

Visszaküldés és garancia

30 napos garancia: Csak a raktáron lévő termékek eredeti, gyári zárt csomagolásban történő visszaküldését fogadjuk el.
12 hónapos garancia: Minden ipari alkatrészünket szakmai műszaki garancia védi.

A megrendeléseket hétfőtől péntekig dolgozzuk fel és szállítjuk (állami ünnepnapok kivételével).

A teljes jogosultság, a készletfeltöltési díjak és a nemzetközi visszaküldési részletek megtekintéséhez kérjük, tekintse meg hivatalos oldalunkat Visszatérítési és Visszaküldési Szabályzat .

TECHNICAL SPECIFICATIONS

Country of origin

Nemrég megtekintett termékek

Műszaki ismeretek

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Electric Actuators Designed to Replace Fluid Power Systems: A Practical Industrial Automation Guide

This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...

2026. június 23.

$Math Operations Using OpenPLC for Industrial Automation Applications$

BECKHOFF FC5121 CANopen Master/Slave Card