Bently Nevada 330103-00-15-10-02-05 3300 XL 8 mm Proximity Probe

Description

330103-00-15-10-02-05: 3300 XL 8 mm proximity probe with M10 x 1 metric thread, configured without armor, featuring 0 mm unthreaded length (Option 00), 150 mm overall case length (Option 15), 1.0 meter total length (Option 10), and a Miniature ClickLoc coaxial connector on standard cable without connector protection (Option 02). This configuration includes Option 05 for CSA, ATEX, and IECEx agency approvals.

This unarmored metric probe variant is used for non-contact eddy-current shaft displacement and vibration measurements within a 3300 XL monitoring system. Unlike variants equipped with stainless steel armor or FluidLoc cable options, this configuration employs standard coaxial cabling and a standard unarmored sleeve, and is designed to operate in systems requiring metric M10 x 1 mounting threads and 150 mm of thread depth.

Features

• M10 x 1 metric thread profile with a case length of 150 mm
• 0 mm unthreaded length maximizing the threaded engagement portion
• 1.0 meter total system length for direct connection or use with standard extension cables
• Miniature coaxial ClickLoc connector with gold-plated brass components
• Standard coaxial cable configuration without external protective armor
• Agency approval option 05 certifying suitability for CSA, ATEX, and IECEx hazardous area installations

Applications

• Shaft vibration and axial position measurement on fluid-film bearing machines
• Keyphasor reference and speed measurements on industrial machinery
• Industrial rotating machinery protection in oil and gas, petrochemical, and power generation plants
• Monitoring radial dynamic motion and axial shaft position

Ordering Information

Technical Specifications

Connections and Interfaces

The probe cable is terminated with a miniature gold-plated male ClickLoc coaxial connector that connects directly to a standard 3300 XL extension cable or Proximitor sensor.

Installation Guidelines

Ensure the mounting thread is tapped to M10 x 1. The maximum thread engagement length is 15 mm to prevent binding. A class-matched thread should be used for all internal threads. Do not exceed the maximum recommended torque during installation. For hazardous area installations, maintain grounding and shielding continuity in accordance with the system installation drawings.

Compliance and Certifications

This probe configuration complies with the following certifications under Option 05:

• CSA (Class I, Division 1 and 2, Groups A, B, C, D)
• ATEX (Zone 0, 1, 2, Group IIC)
• IECEx (Zone 0, 1, 2, Group IIC)