Honeywell 50124386-001 LTA V51/5197 Actuator Mounting Bracket

Hanya 7 item tersisa di stok

Produsen: Honeywell
Nomor Produk: 50124386-001
Negara asal:Amerika Serikat
Jenis Produk: Actuator Mounting Brackets
Pembayaran: T/T, Western Union
Berat: 3000g
Dimensi: 170 mm x 138 mm x 138 mm
Pelabuhan pengiriman: Xiamen
Garansi: 12 bulan

Description

Engineered for heavy-duty industrial valve and damper positioning systems, the Honeywell 50124386-001 serves as a robust mounting bracket solution designed specifically for the LTA, V51, and 5197 series actuator assemblies. This industrial-grade mechanical hardware ensures precise physical alignment, minimizing shaft runout and mechanical wear under high-torque operations.

Features

Precision-machined steel alloy construction for high torsional rigidity.
Corrosion-resistant surface finish optimized for harsh process environments.
Pre-drilled mounting patterns ensuring exact alignment with V51 and LTA actuator footprints.
Heavy-gauge structural design rated to withstand peak mechanical torque applications.

Applications

Industrial combustion air damper control linkages.
Heavy HVAC damper actuator positioning.
Process control valve bracket replacements.
High-vibration fan and ventilation plant installations.

Technical Specifications

Parameter	Specification Value
Manufacturer	Honeywell
Part Number / SKU	50124386-001
Compatible Actuators	Honeywell LTA, V51, and 5197 Series
Material	Heavy-gauge structural steel alloy
Maximum Torque Rating	Supports up to 150 in-lb operating loads
Operating Temperature Limits	-40 to +70 degC (-40 to +158 degF)
Storage Temperature Limits	-40 to +80 degC (-40 to +176 degF)
Approximate Physical Dimensions	170 mm x 138 mm x 138 mm (6-11/16 x 5-29/64 x 5-29/64 inches)
Net Weight	1.4 kg (3.0 lbs)
Shipping Weight (Calculated)	3.0 kg

Alternative Models & Compatibility

This mounting hardware kit is engineered to drop directly into standard industrial footings for the V51 and 5197 Honeywell motorized actuators. It serves as a direct upgrade to legacy structural brackets that lack the structural reinforcement profiles required for high-duty-cycle modulating dampers.

Application Pitfalls & Engineering Notes

Ensure that mounting surfaces are completely flat prior to bolting down the bracket. Any deflection or twist introduced into the bracket base during installation will misalign the linkage or actuator output shaft, leading to premature bearing failure in the drive assembly. If deployed in applications exceeding 150 in-lb peak dynamic load, additional external structural supports are required.

Commissioning & Alignment Tips

Verify shaft concentricity using a dial indicator during initial setup. Radial runout must not exceed tolerances specified in the actuator manual. Tighten all assembly fasteners in an alternating pattern to distribute torque evenly and prevent structural binding.

Installation Guidelines

CRITICAL WARNING: Prior to mounting or performing maintenance on the actuator assembly, disconnect all electrical power sources and isolate any coupled process control equipment. Failure to de-energize mechanical drives can result in unexpected actuator cycle triggers and severe physical injury.

Align the mounting bracket base holes with the actuator installation plate on the process valve or damper frame.

Secure the bracket using high-tensile mounting bolts (Grade 5 or higher recommended) and apply a medium-strength thread-locking compound.

Mount the Honeywell actuator to the bracket top face, ensuring complete alignment of keyways and connecting shafts before final torque is applied.

Key Features:

#Actuator Mounting Brackets #Honeywell LTA

Which Honeywell actuator lines are compatible with this mounting bracket assembly?

This bracket is designed specifically for Honeywell LTA, V51, and 5197 series industrial valve and damper actuators.

What is the maximum torque capacity supported by this mechanical mounting bracket?

It is structurally optimized for heavy industrial operations, handling peak actuator output loads of up to 150 in-lb safely.

Does this mounting bracket require specific environmental considerations?

No. The rugged steel alloy construction and specialized coating allow it to operate reliably in harsh ambient environments ranging from -40 to +70 degC.

Pengiriman Ekspres Global

Pengiriman Standar: 4-6 Hari Kerja melalui DHL, FedEx, dan UPS.
Pengiriman Ekspres: Pengiriman hari yang sama untuk pesanan dalam stok yang dilakukan sebelum pukul 2:00 PM (GMT+8).
Cakupan Seluruh Dunia: Melayani lebih dari 150 negara, termasuk pengiriman cepat ke Arab Saudi dan UAE.

Pengembalian & Garansi

Jaminan 30 Hari: Pengembalian diterima untuk produk yang tersedia dalam stok dengan kemasan asli yang tersegel pabrik.
Garansi 12 Bulan: Setiap komponen industri didukung oleh garansi teknis profesional kami.

Pesanan diproses dan dikirimkan Senin-Jumat (tidak termasuk hari libur nasional).

Untuk kelayakan penuh, biaya pengisian kembali, dan detail pengembalian internasional, silakan lihat resmi kami Kebijakan Pengembalian & Pengembalian Dana .

TECHNICAL SPECIFICATIONS

Country of origin

Honeywell 50124386-001 LTA V51/5197 Actuator Mounting Bracket