Produsen: Mitsubishi Electric
Nomor Produk: FX3U-64MT/ES-A
Negara asal:Amerika Serikat
Jenis Produk: PLC CPU Modules
Pembayaran: T/T, Western Union
Berat: 500g
Dimensi: 220 mm x 110 mm x 105 mm
Pelabuhan pengiriman: Xiamen
Garansi: 12 bulan
Engineered for high-performance automation, the Mitsubishi Electric FX3U-64MT/ES-A functions as a high-speed PLC main unit within the MELSEC FX3U family, integrating 32 digital inputs and 32 transistor outputs. This controller addresses complex machine control applications by combining a highly compact form factor with advanced execution speeds and a 64,000-step program memory. Optimized for positioning and motion control, the unit features built-in high-speed counters and pulse outputs capable of managing multi-axis configurations directly from the base module.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model Series | MELSEC FX3U |
| Part Number / SKU | FX3U-64MT/ES-A |
| Supply Voltage | 100 to 240 V AC (+10% / -15%), 50/60 Hz |
| Power Consumption | 45 W |
| Total Digital I/O Points | 64 points (built-in) |
| Digital Input Specification | 32 points, 24 V DC (Sink or Source selectable) |
| Digital Output Specification | 32 points, Transistor (Sink type) |
| Response Time | Input: Approx. 10 ms; Output: 0.2 ms or less (for high-speed operations) |
| Built-in Communication Port | RS-422 (Mini-DIN 8-pin programming interface) |
| Ambient Operating Temperature | 0 to 55 degC |
| Country of Origin | Japan |
| Shipping Weight (Calculated) | 1.20 kg |
| Package Dimensions (Calculated) | 220 mm x 110 mm x 105 mm |
| Terminal Group | Wiring Assignment and Function |
|---|---|
| L, N, PE | Main AC Power Input (100-240 V AC) and Protective Earth connection. |
| 24+ / S/S | Auxiliary 24 V DC power supply (output) and input configuration sink/source selector terminal. |
| X0 to X37 | 24 V DC Digital Inputs (X0-X7 support high-speed hardware counter configurations). |
| Y0 to Y37 | Transistor Output Terminals. Y0, Y1, and Y2 support up to 100 kHz pulse outputs. |
| COM1 to COM5 | Common reference terminals for transistor outputs (grouped output design). |
When migrating legacy systems from the FX2N-64MT to the FX3U-64MT/ES-A, review your physical panel footprint. The FX3U incorporates a dual-bus architecture, which increases the physical casing width slightly. Programming code from GX Developer can be automatically ported within GX Works2, though high-speed counter pointer modifications and pulse-output instruction formats must be manually verified to match the FX3U hardware instruction set.
Because this unit features Sink transistor outputs (MT/ES-A), the load must be connected between the positive terminal of the power supply and the digital output terminal. Attempting to source current directly from the output pin will damage the internal optical couplers. For inductive loads, such as DC solenoids or auxiliary relays, install an external flyback diode across the load to prevent back-EMF voltage spikes from degrading the output transistors over time.
The built-in 24 V DC auxiliary output power terminal on the CPU can support up to 450mA of current. Do not exceed this budget when powering multiple proximity sensors or encoders. For pulse positioning systems, keep the wiring length between the transistor outputs (Y0-Y2) and the motor drive amplifier below 2 meters and utilize shielded twisted-pair cabling to mitigate high-frequency electromagnetic interference.
CRITICAL SAFETY WARNING
Isolate all electrical power sources before attempting terminal connection or module expansion. Double-check that the supply voltage matches the 100-240 V AC designation; applying high voltage to the DC signal terminals will cause immediate component failure and physical hazards.
Mount the controller horizontally on standard 35 mm DIN rail or directly to a backplate using structural mounting screws, leaving at least 50 mm of clearance around the top and bottom of the unit for natural convection cooling.
Connect the power supply line to the L and N terminals, ensuring the Protective Earth (PE) terminal is tied directly to the system's low-impedance copper ground busbar.
Configure the S/S terminal according to your input sensor types: link S/S to 24+ for Sink input configurations, or link S/S to 0V for Source input configurations.
Secure all terminal blocks using the integrated screws to a torque of 0.5 to 0.8 N-m to prevent contact degradation under mechanical vibrations.
Pengiriman Ekspres Global
Pengembalian & Garansi
Pesanan diproses dan dikirimkan Senin-Jumat (tidak termasuk hari libur nasional).
Untuk kelayakan penuh, biaya pengisian ulang, dan detail pengembalian internasional, silakan lihat resmi kami Kebijakan Pengembalian & Pengembalian Dana .
| Country of origin |
Amerika Serikat
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
Artikel ini menjelaskan bagaimana sistem PLC melakukan operasi matematika inti seperti penjumlahan, pengurangan, perkalian, pembagian, modulo, dan perpangkatan dalam otomasi industri. Artikel ini...
Artikel ini menjelaskan beberapa fungsi logika Boolean lanjutan yang digunakan dalam pemrograman PLC selain operasi dasar AND, OR, dan NOT. Artikel ini membahas bagaimana alat seperti tabel...
Logika Boolean adalah dasar dari setiap program PLC. Dari kontrol mesin sederhana hingga sistem otomasi industri yang kompleks, gerbang logika menentukan bagaimana pengendali merespons perubahan...
Firewall industri memainkan peran penting dalam keamanan siber OT, melindungi jaringan PLC, DCS, dan SCADA melalui segmentasi, kontrol masuk/keluar, dan integrasi IDS/IPS yang sesuai dengan prinsip...
Gripper robot modern berkembang melampaui rahang mekanis tradisional. Mulai dari sistem adhesif yang terinspirasi oleh cicak dan gripper lembut yang aman untuk makanan hingga alat gudang bertenaga...
