Siemens 6ES7647-6AC35-0HK0 SIMATIC BOX PC 627 Industrial PC

Description

This Siemens 6ES7647-6AC35-0HK0 is a SIMATIC BOX PC 627 industrial computer designed for robust performance in demanding automation environments. It is equipped with a Pentium M 730 1.6 GHz processor, 256 MB of DDR2 RAM, and an 80 GB SATA hard drive. The unit features onboard AGP graphics with shared memory, dual 10/100 Mbit/s Ethernet ports for network connectivity, and a variety of standard interfaces including high-current USB 2.0 and serial ports. Integrated industrial-grade features include a watchdog timer, temperature and fan monitoring, and an onboard RAID controller. This model is powered by a 110/230V AC industrial power supply and includes two free PCI slots for expansion.

Features

• Processor: Intel Pentium M 730 (1.6 GHz, 533 MHz FSB, 2 MB SLC)
• Memory: 256 MB DDR2 533 SODIMM
• Storage: 80 GB SATA Hard Disk Drive (HDD)
• Graphics: Onboard AGP with 8-128 MB shared memory
• Networking: Dual 10/100 Mbit/s Ethernet RJ45 ports
• Expansion: 2 free PCI slots
• I/O: 4x USB 2.0, 1x COM1, 1x COM2 (via PCI card), 1x LPT1 (via PCI card)
• Monitoring: Integrated watchdog timer, temperature, and fan monitoring
• Power Supply: 110/230V AC industrial power unit with NAMUR specifications

Applications

• Human-Machine Interface (HMI) and SCADA visualization
• Data acquisition and logging systems
• Machine-level control and processing
• Industrial gateways and communication servers
• Manufacturing Execution Systems (MES) clients

Technical Specifications

Installation Guidelines

1. 1 Mounting: Securely mount the PC in a control cabinet or on a panel with adequate ventilation. Ensure sufficient clearance around the unit for airflow to prevent overheating. Verify all mounting hardware is torqued to specification.
2. 2 Grounding: Connect the chassis to the main protective earth (PE) ground of the cabinet using a low-impedance connection. Proper grounding is essential for operator safety and noise immunity.
3. 3 Power Connection: Connect the 110/230V AC power supply using the provided power cable. Ensure the source voltage matches the power supply rating. Use a dedicated, filtered power source for best performance.
4. 4 I/O Connections: Connect all peripheral devices, including Ethernet, USB, and serial cables. Use shielded cables for all data communication lines and ensure shields are properly terminated to ground at one end to minimize electrical noise.
5. 5 System Startup: After verifying all connections, restore power to the unit. Proceed with operating system installation and application software configuration as required. Monitor system temperatures and fan operation during initial startup.