Siemens 6ES7710-0AA11-0FA0 SIMATIC Field PG Programming Device

Hanya 8 item tersisa di stok

Produsen: Siemens
Nomor Produk: 6ES7710-0AA11-0FA0
Negara asal:Jerman
Jenis Produk: Programming Device
Kode batang: 84713000
Pembayaran: T/T, Western Union
Berat: 4g
Dimensi: 29.0 x 25.0 x 25.0 cm
Pelabuhan pengiriman: Xiamen
Garansi: 12 bulan

Description

The Siemens 6ES7710-0AA11-0FA0 is a SIMATIC Field PG, a ruggedized portable programming device engineered for industrial automation tasks. This model is based on a Pentium 3 processor and is designed for commissioning, servicing, and maintaining automation systems directly on the plant floor. As this unit has a product lifecycle status of Obsolete, it is primarily utilized for supporting and interfacing with legacy Siemens control systems that require period-specific hardware and software environments.

Features

Rugged enclosure for industrial field use
Equipped with a Pentium 3 processor
Portable all-in-one solution for PLC programming and diagnostics
Designated as an obsolete product, ideal for legacy system maintenance

Applications

Commissioning and startup of SIMATIC S5/S7 controllers
Diagnostics and troubleshooting of industrial machinery
Program modification and backup for legacy automation systems
Maintenance and service of HMI panels and drive systems

Technical Specifications

Specification	Value
Manufacturer	Siemens
Part Number	6ES7710-0AA11-0FA0
Product Range	SIMATIC Field PG
Processor Type	Pentium 3
Product Lifecycle Status	Obsolete
Shipping Weight	4.00 kg
Package Dimensions (Calculated)	29.0 x 25.0 x 25.0 cm
Harmonized Tariff Code	84713000
Export Control Classification (ECCN)	N
Country of Origin	Germany (Estimate)

Installation and Handling Guidelines

CRITICAL WARNING: This equipment is intended for use by qualified personnel only. Always de-energize target machinery and follow Lockout/Tagout (LOTO) procedures before connecting any programming or diagnostic cables. Failure to do so can result in electric shock, equipment damage, or unintended machine operation.

1 Visually inspect the Field PG unit, power adapter, and any cables for signs of physical damage before use. Do not operate damaged equipment.
2 Operate the device on a stable, clean, and dry surface. Ensure adequate ventilation around the unit to prevent overheating.
3 Connect the supplied power adapter to a properly grounded AC power source that matches the adapter's voltage and frequency ratings.
4 Use only Siemens-approved programming cables (e.g., MPI, PROFIBUS) appropriate for the target controller. Ensure secure connections at both the Field PG and the PLC port.
5 Before downloading a new configuration or forcing I/O, verify the target machine is in a safe state (e.g., STOP mode) and that all personnel are clear of moving parts.
6 After completing service, disconnect the programming cable from the PLC first, then from the Field PG. Power down the unit and store it in a clean, dry location.

Key Features:

#Programming Device #SIMATIC Field PG

Pengiriman Ekspres Global

Pengiriman Standar: 4-6 Hari Kerja melalui DHL, FedEx, dan UPS.
Pengiriman Ekspres: Pengiriman hari yang sama untuk pesanan dalam stok yang dilakukan sebelum pukul 2:00 PM (GMT+8).
Cakupan Seluruh Dunia: Melayani lebih dari 150 negara, termasuk pengiriman cepat ke Arab Saudi dan UAE.

Pengembalian & Garansi

Jaminan 30 Hari: Pengembalian diterima untuk produk yang tersedia dalam stok dengan kemasan asli yang tersegel pabrik.
Garansi 12 Bulan: Setiap komponen industri didukung oleh garansi teknis profesional kami.

Pesanan diproses dan dikirimkan Senin-Jumat (tidak termasuk hari libur nasional).

Untuk kelayakan penuh, biaya pengisian kembali, dan detail pengembalian internasional, silakan lihat resmi kami Kebijakan Pengembalian & Pengembalian Dana .