Bently Nevada 105839-02-12-05-02 is a reverse-mount proximity probe used in legacy machinery-monitoring installations where the probe is secured from the rear of the bracket or bearing housing. The exact suffix controls the mechanical and cable configuration, so replacement should be based on the full number and the installed transducer-system drawing.
Technical specifications
| Manufacturer |
Bently Nevada |
| Part number |
105839-02-12-05-02 |
| Product type |
Reverse-mount eddy-current proximity probe |
| Probe tip class |
8 mm reverse-mount format |
| Nominal system scale factor |
7.87 V/mm (200 mV/mil), when used as part of the specified matched system |
| Signal |
AC and DC voltage components are available from the associated Proximitor Sensor |
| Connector |
Miniature coaxial connector; confirm the installed mating cable before ordering |
| Configuration control |
Complete suffix defines probe geometry, case/cable arrangement and connector option |
Installation and replacement checks
- Compare the complete nameplate number and the physical probe image with the removed part.
- Confirm reverse-mount thread, usable case length, cable length and connector style; these are not interchangeable solely because the tip diameter is similar.
- Keep the total probe plus extension-cable length matched to the installed Proximitor Sensor.
- After installation, set mechanical clearance from the documented electrical gap voltage and verify runout before enabling alarms or trips.
Dimensions and shipping
The probe tip diameter is approximately 8 mm; the installed length depends on the ordered suffix and mounting position. Estimated packed size: 16 × 12 × 6 cm. Estimated shipping weight: 0.35 kg. Packaging figures are estimates only; the final gross weight and carton must be measured by the warehouse.