The Bently Nevada 128987-130-01-05 is a legacy 3300 XL 8 mm proximity probe assembly. It is intended for use with a compatible extension cable and 3300 XL Proximitor Sensor to form a calibrated eddy-current measurement system for shaft vibration or axial position. The exact suffix must be matched; it carries mechanical and cable-option details that are not interchangeable by appearance alone.
Technical specifications
| Manufacturer |
Bently Nevada |
| Part number |
128987-130-01-05 |
| Product family |
3300 XL 8 mm Proximity Transducer System |
| Component |
Proximity probe assembly |
| Measurement principle |
Eddy-current, non-contact displacement measurement |
| Matched system scale factor |
7.87 V/mm (200 mV/mil), nominal |
| Matched system linear range |
2.0 mm (80 mil) |
| Frequency response |
0 to 10 kHz for the matched system |
| Minimum target diameter |
15.2 mm |
| Standard probe operating temperature |
-35 to +120 °C |
| System cable type |
75 Ω triaxial cable with the specified 3300 XL connector arrangement |
Compatibility and ordering checks
- Match the complete 128987-130-01-05 code, not only the 128987 family number.
- Confirm the mating extension cable and Proximitor Sensor part numbers and the required combined system length.
- Check mounting thread, case length, cable armour option and connector condition on the physical probe.
- Maintain the minimum cable bend radius and protect the connector from contamination during installation.
Dimensions and shipping
| Recorded assembly envelope |
Approximately 1.8 × 1.6 × 123 cm |
| Net weight |
Approximately 0.06 kg |
| Estimated package dimensions |
28 × 26 × 8 cm, cable coiled |
| Estimated shipping weight |
0.35 kg |
The long dimension is the recorded probe-and-lead envelope and should be checked against the physical unit. Packaging values are air-freight estimates; warehouse measurement at dispatch takes precedence.
Procurement notes
For legacy probe numbers, provide close-up photos of the nameplate, connector and threaded body. Also provide the installed extension-cable and Proximitor numbers to confirm the complete transducer chain.