The Bently Nevada 129957-085-310-05 is a legacy 3300 XL 8 mm extension cable with an 8.5 m cable length. It connects a compatible probe lead to the Proximitor Sensor in a matched eddy-current transducer system. The complete suffix must be retained because connector and protective options can differ within the 129957 family.
Technical specifications
| Manufacturer |
Bently Nevada |
| Part number |
129957-085-310-05 |
| Product family |
3300 XL 8 mm Proximity Transducer System |
| Product type |
Extension cable |
| Cable length |
8.5 m |
| Cable construction |
75 Ω triaxial cable |
| Minimum bend radius |
25.4 mm |
| Operating temperature |
-35 to +65 °C for the standard extension cable |
| Reference cable mass |
Approximately 34 g/m; about 0.29 kg for 8.5 m before connector variation |
Compatibility and ordering checks
- Verify the full 129957-085-310-05 code and 8.5 m length.
- Confirm that the probe lead and this extension cable provide the required total matched-system length.
- Match connector and armour options to the installed cable; similar-looking 3300 cables may not be electrically interchangeable.
- Maintain bend radius and keep connectors clean and dry during installation.
Dimensions and shipping
| Product length |
8.5 m cable, shipped coiled |
| Calculated cable mass |
Approximately 0.29 kg before connector variation |
| Estimated package dimensions |
32 × 30 × 10 cm |
| Estimated shipping weight |
0.6 kg |
The package values are estimates for a protected cable coil. Final dimensions and shipping weight should be taken from warehouse measurement.
Procurement notes
Provide the existing probe and Proximitor part numbers with the enquiry. The 8.5 m extension is normally selected to complete a specified overall system length; it should not be chosen only because it fits physically.