Bently Nevada 144181-50-05 is a 3300 XL 5/8 mm Proximitor Sensor configured for a matched 5 m proximity-transducer system. It powers the compatible probe, conditions the eddy-current signal and provides a voltage proportional to the distance between the probe tip and a conductive target.
Technical specifications
| Manufacturer |
Bently Nevada |
| Part number |
144181-50-05 |
| Product type |
3300 XL 5/8 mm Proximitor Sensor |
| System length |
5 m matched probe-and-extension-cable system |
| Measurement principle |
Eddy-current proximity measurement |
| Nominal scale factor |
7.87 V/mm (200 mV/mil) for the matched 5/8 mm system |
| Supply |
Negative DC supply used by the 3300 XL proximity system; verify site power and wiring against the installed drawing |
| Connections |
OUT, COM and Vt terminals plus probe/extension-cable connection |
| Measured variables |
Static gap/position and dynamic vibration when used with the correct probe system |
Compatibility and replacement checks
- Match the complete number 144181-50-05, not only the 144181 family.
- Confirm the installed probe family and total system length. A 5 m Proximitor Sensor must be used with the corresponding combined probe and extension-cable length.
- Do not assume interchangeability from connector appearance alone; probe diameter, cable length, target material and approvals affect calibration.
- Record the existing gap voltage before removal and set the replacement probe gap using the machine documentation.
Dimensions and shipping
The sensor is a compact DIN-rail/panel-mounted signal conditioner; verify mounting-hole and enclosure clearance from the installed unit. Estimated packed size: 18 × 14 × 8 cm. Estimated shipping weight: 0.60 kg. These are packaging estimates for air-freight planning and must be confirmed by warehouse measurement.