Option 08 (0.8 in unthreaded length) and Option 24 (2.4 in overall case length) specify this non-armored 3300 5 mm proximity probe configuration — 330171-08-24-10-02-00.
This configuration is supplied with a 1.0 m (3.3 feet) integrated total cable length (Option 10) terminated with a gold-plated miniature coaxial ClickLoc connector on standard FEP-insulated coaxial cable (Option 02) without a separate connector protector. It does not carry hazardous area agency certifications (Option 00), rendering it suitable for standard safe-area industrial machinery layouts. Built with a reduced 5.2 mm (0.21 in) tip diameter, this probe fits into confined mechanical spaces where standard 8 mm probes cannot be deployed, such as narrow spaces between thrust bearing pads, while delivering identical electrical performance characteristics within compatible 3300 XL transducer systems.
| Option Segment | Code on This SKU | Description / Specification |
|---|---|---|
| Orderable Part Number | 330171-08-24-10-02-00 | 3300 5 mm Proximity Probe, 1/4-28 UNF-2A thread, non-armored |
| A - Unthreaded Length Option | 08 | 0.8 in (orderable in increments of 0.1 in; maximum 8.8 in, minimum 0.0 in) |
| B - Overall Case Length Option | 24 | 2.4 in (orderable in increments of 0.1 in; maximum 9.6 in, minimum 0.8 in) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) |
| D - Connector Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No approvals required (Agency Approval Option not required) |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / SKU | 330171-08-24-10-02-00 |
| Probe Type | 3300 5 mm Proximity Probe |
| Thread Size | 1/4-28 UNF-2A |
| Armor Option | Without armor (Non-armored standard coaxial cable) |
| Linear Range | 2.0 mm (80 mils), starting at 0.25 mm (10 mils) from target (from 0.25 to 2.3 mm / 10 to 90 mils) |
| Recommended Gap Setting | 1.27 mm (50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +/-6.5% typical (measured with AISI 4140 steel target) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.038 mm (+/-1.5 mils) typical deviation |
| Frequency Response | 0 to 10 kHz: +0, -3 dB (with up to 305 m of field wiring) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter (flat target) |
| Shaft Diameter Limits | Minimum: 50.8 mm (2 in), Recommended minimum: 76.2 mm (3 in) |
| Probe DC Resistance | 7.59 +/- 0.50 Ohms (nominal resistance for 1.0 m length) |
| Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Probe Operating Temperature | -35 degC to +177 degC (-31 degF to +351 degF) |
| Pressure Seal Rating | Seals differential pressure using internal fluorocarbon O-ring between tip and case |
| Probe Tip Diameter | 5.2 mm (0.21 in) maximum |
| Wrench Flat Size | 5.6 mm (7/32 in) |
| Connector Type | Miniature gold-plated brass male coaxial ClickLoc connector |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330171-08-24-10-02-00
Country of origin:United States
Product Type: 3300 5mm Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 100g
Dimensions: 40 mm x 85 mm x 85 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 08 (0.8 in unthreaded length) and Option 24 (2.4 in overall case length) specify this non-armored 3300 5 mm proximity probe configuration — 330171-08-24-10-02-00.
This configuration is supplied with a 1.0 m (3.3 feet) integrated total cable length (Option 10) terminated with a gold-plated miniature coaxial ClickLoc connector on standard FEP-insulated coaxial cable (Option 02) without a separate connector protector. It does not carry hazardous area agency certifications (Option 00), rendering it suitable for standard safe-area industrial machinery layouts. Built with a reduced 5.2 mm (0.21 in) tip diameter, this probe fits into confined mechanical spaces where standard 8 mm probes cannot be deployed, such as narrow spaces between thrust bearing pads, while delivering identical electrical performance characteristics within compatible 3300 XL transducer systems.
| Option Segment | Code on This SKU | Description / Specification |
|---|---|---|
| Orderable Part Number | 330171-08-24-10-02-00 | 3300 5 mm Proximity Probe, 1/4-28 UNF-2A thread, non-armored |
| A - Unthreaded Length Option | 08 | 0.8 in (orderable in increments of 0.1 in; maximum 8.8 in, minimum 0.0 in) |
| B - Overall Case Length Option | 24 | 2.4 in (orderable in increments of 0.1 in; maximum 9.6 in, minimum 0.8 in) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) |
| D - Connector Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No approvals required (Agency Approval Option not required) |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / SKU | 330171-08-24-10-02-00 |
| Probe Type | 3300 5 mm Proximity Probe |
| Thread Size | 1/4-28 UNF-2A |
| Armor Option | Without armor (Non-armored standard coaxial cable) |
| Linear Range | 2.0 mm (80 mils), starting at 0.25 mm (10 mils) from target (from 0.25 to 2.3 mm / 10 to 90 mils) |
| Recommended Gap Setting | 1.27 mm (50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +/-6.5% typical (measured with AISI 4140 steel target) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.038 mm (+/-1.5 mils) typical deviation |
| Frequency Response | 0 to 10 kHz: +0, -3 dB (with up to 305 m of field wiring) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter (flat target) |
| Shaft Diameter Limits | Minimum: 50.8 mm (2 in), Recommended minimum: 76.2 mm (3 in) |
| Probe DC Resistance | 7.59 +/- 0.50 Ohms (nominal resistance for 1.0 m length) |
| Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Probe Operating Temperature | -35 degC to +177 degC (-31 degF to +351 degF) |
| Pressure Seal Rating | Seals differential pressure using internal fluorocarbon O-ring between tip and case |
| Probe Tip Diameter | 5.2 mm (0.21 in) maximum |
| Wrench Flat Size | 5.6 mm (7/32 in) |
| Connector Type | Miniature gold-plated brass male coaxial ClickLoc connector |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
