Fully threaded 1/2-20 UNF steel probe body (Option 00) with 2.0 in case (Option 20) and 9.0 m lead (Option 90) - 330701-00-20-90-02-00, a 3300 XL 11 mm Proximity Probe without armor. This configuration is part of the 3300 XL 11 mm Proximity Transducer System, which is used for non-contacting vibration and displacement measurements on fluid film bearing machines. The larger 11 mm tip provides a longer linear range of 4.0 mm (160 mils), making it suitable for axial thrust position measurements, steam turbine ramp differential expansion, rod drop measurements on reciprocating compressors, tachometer or zero speed measurements, and Keyphasor phase reference signals.
Unlike armored options (such as the 330702 series) or reverse mount probes (such as the 330705), this 330701 configuration features an unarmored standard FEP-insulated triaxial cable. The 9.0-meter total system length is achieved directly via the probe's integrated lead, connecting directly to 9-meter Proximitor sensors without requiring an intermediate extension cable, reducing connector-to-connector interface points. Standard ClickLoc coaxial connectors maintain electrical integrity while the lack of hazardous area approvals (Option 00) makes it suitable for general-purpose, non-hazardous industrial installations.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330701-00-20-90-02-00 | 3300 XL 11 mm proximity probe, 1/2-20 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in unthreaded length |
| B - Overall Case Length Option | 20 | 2.0 in threaded case length |
| C - Total Length Option | 90 | 9.0 meters (29.5 feet) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330701-00-20-90-02-00 |
| System Compatibility | 3300 XL 11 mm Proximity Transducer System |
| Probe Tip Diameter | 11 mm |
| Case Thread Specification | 1/2-20 UNF-2A |
| Armor Configuration | Unarmored (without armor) |
| Cable Material | 75 ohm triaxial, fluoroethylene propylene (FEP) insulated |
| Total Probe Length | 9.0 meters (29.5 feet) |
| Connector Type | Miniature coaxial ClickLoc |
| Connector Protector | None (Option 02) |
| Linear Range | 4.0 mm (160 mils), from approximately 0.5 to 4.5 mm (20 to 180 mils) |
| System Output Sensitivity (ISF) | 3.94 V/mm (100 mV/mil) +/- 10% under standard calibration |
| Recommended Gap Setting | 2.5 mm (100 mils) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Maximum Case Torque | 45.2 N-m (400 in-lb) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum) | 330 N (75 lb) probe case to probe lead; 270 N (60 lb) at probe lead to extension cable connectors |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330701-00-20-90-02-00
Country of origin:United States
Product Type: 3300 XL 11 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 180g
Dimensions: 50 mm x 100 mm x 100 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Fully threaded 1/2-20 UNF steel probe body (Option 00) with 2.0 in case (Option 20) and 9.0 m lead (Option 90) - 330701-00-20-90-02-00, a 3300 XL 11 mm Proximity Probe without armor. This configuration is part of the 3300 XL 11 mm Proximity Transducer System, which is used for non-contacting vibration and displacement measurements on fluid film bearing machines. The larger 11 mm tip provides a longer linear range of 4.0 mm (160 mils), making it suitable for axial thrust position measurements, steam turbine ramp differential expansion, rod drop measurements on reciprocating compressors, tachometer or zero speed measurements, and Keyphasor phase reference signals.
Unlike armored options (such as the 330702 series) or reverse mount probes (such as the 330705), this 330701 configuration features an unarmored standard FEP-insulated triaxial cable. The 9.0-meter total system length is achieved directly via the probe's integrated lead, connecting directly to 9-meter Proximitor sensors without requiring an intermediate extension cable, reducing connector-to-connector interface points. Standard ClickLoc coaxial connectors maintain electrical integrity while the lack of hazardous area approvals (Option 00) makes it suitable for general-purpose, non-hazardous industrial installations.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330701-00-20-90-02-00 | 3300 XL 11 mm proximity probe, 1/2-20 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in unthreaded length |
| B - Overall Case Length Option | 20 | 2.0 in threaded case length |
| C - Total Length Option | 90 | 9.0 meters (29.5 feet) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330701-00-20-90-02-00 |
| System Compatibility | 3300 XL 11 mm Proximity Transducer System |
| Probe Tip Diameter | 11 mm |
| Case Thread Specification | 1/2-20 UNF-2A |
| Armor Configuration | Unarmored (without armor) |
| Cable Material | 75 ohm triaxial, fluoroethylene propylene (FEP) insulated |
| Total Probe Length | 9.0 meters (29.5 feet) |
| Connector Type | Miniature coaxial ClickLoc |
| Connector Protector | None (Option 02) |
| Linear Range | 4.0 mm (160 mils), from approximately 0.5 to 4.5 mm (20 to 180 mils) |
| System Output Sensitivity (ISF) | 3.94 V/mm (100 mV/mil) +/- 10% under standard calibration |
| Recommended Gap Setting | 2.5 mm (100 mils) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Maximum Case Torque | 45.2 N-m (400 in-lb) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum) | 330 N (75 lb) probe case to probe lead; 270 N (60 lb) at probe lead to extension cable connectors |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
