Option 00 (0 mm unthreaded length), Option 060 (60 mm overall case length), and Option 11 (ClickLoc connector with connector protector, FluidLoc cable) specify this standard metric 3300 XL 11 mm Proximity Probe configuration — 330703-00-060-10-11-00. This non-contact eddy-current displacement probe has an M14 x 1.5 metric thread and does not feature stainless steel armor. It is used in 3300 XL 11 mm Proximity Transducer Systems for shaft vibration, axial position, and Keyphasor measurements on rotating machinery such as steam turbines, gas turbines, and compressors.
This specific configuration incorporates a FluidLoc cable (Option 11) to prevent oil or other fluids from leaking along the internal cable conductor or jacket. It has a pre-installed fluorosilicone connector protector at the ClickLoc coaxial connector interface to seal against moisture and environmental contaminants. With a total length of 1.0 meter (Option 10), this probe does not require agency approval certifications (Option 00) and is designed to interface with a 3300 XL 11 mm extension cable and Proximitor sensor for a complete 5-meter or 9-meter transducer system.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330703-00-060-10-11-00 | 3300 XL 11 mm Proximity Probe, M14 x 1.5 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm unthreaded length |
| B - Overall Case Length Option | 060 | 60 mm overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable-Type Option | 11 | Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330703-00-060-10-11-00 |
| Product Type | 3300 XL 11 mm Proximity Probe |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Case Thread | M14 x 1.5 metric thread |
| Protective Armor | None (unarmored) |
| Probe Cable Type | 75 ohm triaxial, fluoroethylene propylene (FEP) insulated, FluidLoc style |
| Connector Type | Miniature ClickLoc coaxial male connector |
| Connector Protector | Pre-installed fluorosilicone connector protector |
| Unthreaded Length | 0 mm |
| Case Length | 60 mm |
| Total Probe Length | 1.0 meter (3.3 feet) |
| Linear Range | 4.0 mm (160 mils), beginning at approx 0.5 mm (20 mils) from target (from 0.5 to 4.5 mm / 20 to 180 mils) |
| Incremental Scale Factor (ISF) | 3.94 V/mm (100 mV/mil) +/-10% (measured in 0.5 mm increments) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.10 mm (+/-4 mils) under standard conditions; less than +/-0.15 mm (+/-6 mils) over extended temperatures |
| Recommended Gap Setting | 2.5 mm (100 mils) |
| Frequency Response | 0 to 8 kHz (+0, -3 dB typical) with up to 305 meters (1000 feet) of field wiring |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Pressure Sealing | Designed to seal differential pressure between tip and case (Viton O-ring) |
| Tensile Strength (Maximum) | 330 N (75 lb) probe case to probe lead; 270 N (60 lb) probe lead to extension cable connectors |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Recommended Installation Torque | 21.1 N-m (187 in-lb) for M14x1.5 (maximum rated torque is 63.3 N-m / 560 in-lb) |
| Target Material Calibration | AISI 4140 steel target (diameter 30.5 mm or larger) |
| Agency Approvals | None (Option 00) |
Observe the minimum bend radius of 25.4 mm (1.0 in) for the coaxial cable during installation to avoid signal attenuation or inner core fracture. Tighten the M14 x 1.5 probe case to the recommended installation torque of 21.1 N-m (187 in-lb); do not exceed the maximum limit of 63.3 N-m (560 in-lb) to prevent thread strip-out or structural failure of the probe casing. The pre-installed fluorosilicone connector protector must be properly positioned over the probe-to-extension-cable coaxial mating interface to ensure an environmental seal against oil, water, and atmospheric contaminants.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330703-00-060-10-11-00
Country of origin:United States
Product Type: 3300 XL 11 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 180g
Dimensions: 50 mm x 100 mm x 100 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 00 (0 mm unthreaded length), Option 060 (60 mm overall case length), and Option 11 (ClickLoc connector with connector protector, FluidLoc cable) specify this standard metric 3300 XL 11 mm Proximity Probe configuration — 330703-00-060-10-11-00. This non-contact eddy-current displacement probe has an M14 x 1.5 metric thread and does not feature stainless steel armor. It is used in 3300 XL 11 mm Proximity Transducer Systems for shaft vibration, axial position, and Keyphasor measurements on rotating machinery such as steam turbines, gas turbines, and compressors.
This specific configuration incorporates a FluidLoc cable (Option 11) to prevent oil or other fluids from leaking along the internal cable conductor or jacket. It has a pre-installed fluorosilicone connector protector at the ClickLoc coaxial connector interface to seal against moisture and environmental contaminants. With a total length of 1.0 meter (Option 10), this probe does not require agency approval certifications (Option 00) and is designed to interface with a 3300 XL 11 mm extension cable and Proximitor sensor for a complete 5-meter or 9-meter transducer system.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330703-00-060-10-11-00 | 3300 XL 11 mm Proximity Probe, M14 x 1.5 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm unthreaded length |
| B - Overall Case Length Option | 060 | 60 mm overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable-Type Option | 11 | Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330703-00-060-10-11-00 |
| Product Type | 3300 XL 11 mm Proximity Probe |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Case Thread | M14 x 1.5 metric thread |
| Protective Armor | None (unarmored) |
| Probe Cable Type | 75 ohm triaxial, fluoroethylene propylene (FEP) insulated, FluidLoc style |
| Connector Type | Miniature ClickLoc coaxial male connector |
| Connector Protector | Pre-installed fluorosilicone connector protector |
| Unthreaded Length | 0 mm |
| Case Length | 60 mm |
| Total Probe Length | 1.0 meter (3.3 feet) |
| Linear Range | 4.0 mm (160 mils), beginning at approx 0.5 mm (20 mils) from target (from 0.5 to 4.5 mm / 20 to 180 mils) |
| Incremental Scale Factor (ISF) | 3.94 V/mm (100 mV/mil) +/-10% (measured in 0.5 mm increments) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.10 mm (+/-4 mils) under standard conditions; less than +/-0.15 mm (+/-6 mils) over extended temperatures |
| Recommended Gap Setting | 2.5 mm (100 mils) |
| Frequency Response | 0 to 8 kHz (+0, -3 dB typical) with up to 305 meters (1000 feet) of field wiring |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Pressure Sealing | Designed to seal differential pressure between tip and case (Viton O-ring) |
| Tensile Strength (Maximum) | 330 N (75 lb) probe case to probe lead; 270 N (60 lb) probe lead to extension cable connectors |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Recommended Installation Torque | 21.1 N-m (187 in-lb) for M14x1.5 (maximum rated torque is 63.3 N-m / 560 in-lb) |
| Target Material Calibration | AISI 4140 steel target (diameter 30.5 mm or larger) |
| Agency Approvals | None (Option 00) |
Observe the minimum bend radius of 25.4 mm (1.0 in) for the coaxial cable during installation to avoid signal attenuation or inner core fracture. Tighten the M14 x 1.5 probe case to the recommended installation torque of 21.1 N-m (187 in-lb); do not exceed the maximum limit of 63.3 N-m (560 in-lb) to prevent thread strip-out or structural failure of the probe casing. The pre-installed fluorosilicone connector protector must be properly positioned over the probe-to-extension-cable coaxial mating interface to ensure an environmental seal against oil, water, and atmospheric contaminants.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Sostituire un 1756-L73 non significa automaticamente aggiornare il firmware. Questa guida confronta le versioni 19.013, 21.011 e 31.011, concentrandosi sulla compatibilità dei progetti, sulle...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
