Bently Nevada 3500/25 is a two-channel, half-height Enhanced Keyphasor Module for the 3500 machinery protection system. It conditions proximity-probe or magnetic-pickup inputs into digital Keyphasor signals used by 3500 monitors and external diagnostic equipment for phase, speed and timing reference.
Technical specifications
| Manufacturer |
Bently Nevada |
| Model |
3500/25 Enhanced Keyphasor Module |
| Input channels |
Two independent Keyphasor channels |
| Supported transducer types |
Compatible proximity-transducer or magnetic-pickup signals as configured |
| Rack position |
One half-height front slot; full-height locations require the appropriate mounting adapter |
| Rear I/O requirement |
One matched full-height rear I/O slot |
| Operating temperature |
-30 to +65 °C with standard I/O modules |
| Main-module dimensions |
119.9 × 24.4 × 256.5 mm |
| Main-module weight |
0.34 kg |
Hardware identity and replacement checks
- “3500/25” describes the function, not a complete spare identity. Record the main PWA number, front-panel revision and fitted I/O module before ordering.
- The current manufacturer datasheet identifies 149369-01 as the main module that replaces 125792-01; confirm rack firmware and project records before substitution.
- Internal-termination, external-termination and internal-barrier I/O modules are not interchangeable merely because the front module is the same.
- Back up rack configuration and record transducer type, thresholds, hysteresis, event polarity and channel routing before replacement.
- After installation, verify both Keyphasor pulse trains, phase reference, speed indication and event timing before returning dependent protection channels to service.
Dimensions and shipping
Main-module envelope: 119.9 × 24.4 × 256.5 mm; net mass 0.34 kg. Estimated packed size: 36 × 16 × 10 cm. Estimated shipping weight: 1.0 kg. The estimate includes protective antistatic packaging; confirm the actual carton before dispatch.