The CA21000-00-00-00-036-01-02 explosion-proof housing assembly from Bently Nevada is engineered for hazardous industrial environments where vibration probes and proximity transducer systems require certified mechanical protection. This housing assembly supports installation in refinery compressor trains, gas turbine skids, offshore platforms, petrochemical pumping stations, and power generation facilities exposed to combustible gas atmospheres.
The enclosure uses an aluminum main body combined with a 304 stainless steel sleeve to improve corrosion resistance and long-term structural stability in high-vibration process areas. Its 3.6 in probe penetration depth allows stable sensor routing inside explosion-proof junction locations while maintaining secure mechanical isolation. The assembly helps reduce unplanned downtime by protecting signal transmission hardware from contamination, mechanical damage, and hazardous-area exposure. Bently Nevada designed this unit for integration with industrial vibration monitoring architectures where compliance, durability, and maintenance accessibility remain critical operational requirements.
| Code Segment | Description |
|---|---|
| CA21000 | Explosion-proof housing assembly series |
| 00 | Probe not included |
| 00 | 0 metre cable length |
| 00 | No standoff adapter |
| 036 | 3.6 in probe penetration |
| 01 | One explosion-proof fitting and one plug |
| 02 | 3/4-14 NPT mounting thread |
The housing assembly uses a flameproof mechanical structure suitable for classified hazardous zones commonly found in oil and gas processing facilities. The aluminum enclosure reduces total installation weight while the stainless steel sleeve improves resistance against moisture, salt spray, lubricants, and process contaminants.
The 3/4-14 NPT mounting interface supports direct installation into standard industrial conduit systems. The supplied explosion-proof fitting and sealing plug simplify field wiring configuration while maintaining enclosure integrity. The assembly supports compatibility with multiple Bently Nevada proximity probe configurations used in TSI and rotating machinery monitoring systems.
| Parameter | Specification |
|---|---|
| Model | CA21000-00-00-00-036-01-02 |
| Brand | Bently Nevada |
| Product Type | Explosion-Proof Housing Assembly |
| Origin | U.S.A |
| Housing Material | Aluminum body with 304 stainless steel sleeve |
| Probe Included | No |
| Probe Penetration | 3.6 in |
| Cable Length | 0 metre |
| Mounting Thread | 3/4-14 NPT |
| Fittings | One explosion-proof fitting and one plug |
| Weight | Approx. 2 kg |
| Dimensions | Compact hazardous-area enclosure format |
| Operating Temp | -40 to 85 deg C typical industrial range |
| Power Consumption | Passive mechanical assembly, no power required |
| Application Areas | Oil and gas, turbines, compressors, petrochemical plants |
| Installation Type | Hazardous-area conduit mounting |
Can this housing assembly operate in hazardous refinery environments?
Yes. The assembly is designed for explosion-proof installations in hazardous industrial areas including refineries, gas compression stations, and offshore platforms.
Does the unit include a proximity probe or extension cable?
No. This configuration specifies no probe and no extension cable. The housing assembly is supplied as a mechanical protection enclosure only.
Which mounting thread does this model use?
This version uses a 3/4-14 NPT threaded mounting interface for industrial conduit compatibility.
Can the enclosure support older Bently Nevada monitoring systems?
Yes. The assembly supports integration with many legacy and modern Bently Nevada proximity transducer installations used in rotating machinery monitoring systems.
Before installation, verify that the conduit entry thread matches the site hazardous-area specification and sealing requirements. Incorrect thread engagement may compromise explosion-proof integrity.
Use corrosion-resistant conduit sealing compounds in offshore or chemical processing environments where moisture intrusion and vapor exposure are common. Maintain proper grounding continuity between the housing assembly and plant grounding infrastructure.
During probe routing, avoid excessive cable bending inside the enclosure cavity. Sharp bending radius conditions can shorten probe cable service life and increase signal instability during long-term machine vibration monitoring.
For high-temperature turbine enclosures, maintain adequate spacing from process heat sources to reduce thermal stress on internal sensor connections and sealing components.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: CA21000-00-00-00-036-01-02
Country of origin:United States
Product Type: Explosion-Proof Housing Assembly
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
The CA21000-00-00-00-036-01-02 explosion-proof housing assembly from Bently Nevada is engineered for hazardous industrial environments where vibration probes and proximity transducer systems require certified mechanical protection. This housing assembly supports installation in refinery compressor trains, gas turbine skids, offshore platforms, petrochemical pumping stations, and power generation facilities exposed to combustible gas atmospheres.
The enclosure uses an aluminum main body combined with a 304 stainless steel sleeve to improve corrosion resistance and long-term structural stability in high-vibration process areas. Its 3.6 in probe penetration depth allows stable sensor routing inside explosion-proof junction locations while maintaining secure mechanical isolation. The assembly helps reduce unplanned downtime by protecting signal transmission hardware from contamination, mechanical damage, and hazardous-area exposure. Bently Nevada designed this unit for integration with industrial vibration monitoring architectures where compliance, durability, and maintenance accessibility remain critical operational requirements.
| Code Segment | Description |
|---|---|
| CA21000 | Explosion-proof housing assembly series |
| 00 | Probe not included |
| 00 | 0 metre cable length |
| 00 | No standoff adapter |
| 036 | 3.6 in probe penetration |
| 01 | One explosion-proof fitting and one plug |
| 02 | 3/4-14 NPT mounting thread |
The housing assembly uses a flameproof mechanical structure suitable for classified hazardous zones commonly found in oil and gas processing facilities. The aluminum enclosure reduces total installation weight while the stainless steel sleeve improves resistance against moisture, salt spray, lubricants, and process contaminants.
The 3/4-14 NPT mounting interface supports direct installation into standard industrial conduit systems. The supplied explosion-proof fitting and sealing plug simplify field wiring configuration while maintaining enclosure integrity. The assembly supports compatibility with multiple Bently Nevada proximity probe configurations used in TSI and rotating machinery monitoring systems.
| Parameter | Specification |
|---|---|
| Model | CA21000-00-00-00-036-01-02 |
| Brand | Bently Nevada |
| Product Type | Explosion-Proof Housing Assembly |
| Origin | U.S.A |
| Housing Material | Aluminum body with 304 stainless steel sleeve |
| Probe Included | No |
| Probe Penetration | 3.6 in |
| Cable Length | 0 metre |
| Mounting Thread | 3/4-14 NPT |
| Fittings | One explosion-proof fitting and one plug |
| Weight | Approx. 2 kg |
| Dimensions | Compact hazardous-area enclosure format |
| Operating Temp | -40 to 85 deg C typical industrial range |
| Power Consumption | Passive mechanical assembly, no power required |
| Application Areas | Oil and gas, turbines, compressors, petrochemical plants |
| Installation Type | Hazardous-area conduit mounting |
Can this housing assembly operate in hazardous refinery environments?
Yes. The assembly is designed for explosion-proof installations in hazardous industrial areas including refineries, gas compression stations, and offshore platforms.
Does the unit include a proximity probe or extension cable?
No. This configuration specifies no probe and no extension cable. The housing assembly is supplied as a mechanical protection enclosure only.
Which mounting thread does this model use?
This version uses a 3/4-14 NPT threaded mounting interface for industrial conduit compatibility.
Can the enclosure support older Bently Nevada monitoring systems?
Yes. The assembly supports integration with many legacy and modern Bently Nevada proximity transducer installations used in rotating machinery monitoring systems.
Before installation, verify that the conduit entry thread matches the site hazardous-area specification and sealing requirements. Incorrect thread engagement may compromise explosion-proof integrity.
Use corrosion-resistant conduit sealing compounds in offshore or chemical processing environments where moisture intrusion and vapor exposure are common. Maintain proper grounding continuity between the housing assembly and plant grounding infrastructure.
During probe routing, avoid excessive cable bending inside the enclosure cavity. Sharp bending radius conditions can shorten probe cable service life and increase signal instability during long-term machine vibration monitoring.
For high-temperature turbine enclosures, maintain adequate spacing from process heat sources to reduce thermal stress on internal sensor connections and sealing components.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Silver
|
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Sostituire un 1756-L73 non significa automaticamente aggiornare il firmware. Questa guida confronta le versioni 19.013, 21.011 e 31.011, concentrandosi sulla compatibilità dei progetti, sulle...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
