The General Electric IC693CPU360 is a high-performance single-slot central processing unit module designed specifically for the Series 90-30 programmable logic controller platform. Powered by an 80386EX microprocessor operating at a speed of 25 MHz, this CPU module delivers reliable execution speeds with a typical scan rate of 0.22 milliseconds per 1K of Boolean logic contacts. It provides extensive memory capacity supporting up to 240K bytes of user program memory (dependent on firmware release and configured word memory allocations) and utilizes both RAM and Flash memory storage.
This controller module supports a maximum system configuration of up to 8 baseplates, combining a CPU baseplate with up to 7 expansion and/or remote baseplates. It features a built-in serial port utilizing the PLC power supply connector that natively supports SNP and SNP-X slave protocols. For advanced communication requirements, the unit supports LAN multidrop connectivity as well as optional communication modules including Ethernet, FIP, Profibus, GBC, GCM, and GCM+.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Product Catalog Number | IC693CPU360 |
| Product Type | Single-Slot CPU Module |
| Series | Series 90-30 |
| Processor Type | 80386EX |
| Processor Speed | 25 MHz |
| Power Supply Load Requirement | 670 mA from +5 VDC supply |
| Maximum User Program Memory | Up to 240K Bytes (Firmware Release 9.0+) |
| Discrete Inputs (%I) / Outputs (%Q) | 2,048 points / 2,048 points |
| Internal Coils (%M) | 4,096 bits |
| Typical Scan Rate | 0.22 ms per 1K Boolean contacts |
| Baseplate Capacity | Up to 8 baseplates per system |
| Built-in Serial Ports | 1 port (SNP slave and SNP-X slave protocols) |
| Memory Storage Type | RAM and Flash |
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Country of Origin | United States |
The IC693CPU360 module occupies a single slot on the Series 90-30 CPU baseplate. It features one built-in serial port that interfaces through the connector located on the PLC power supply, supporting SNP and SNP-X slave protocols directly. Additional communication expansions are supported via backplane connectivity for LAN multidrop, as well as optional plug-in modules such as Ethernet, Profibus, FIP, GBC, GCM, and GCM+ modules.
Ensure all power to the Series 90-30 baseplate is turned off before installing or removing the CPU module. Insert the module firmly into the designated CPU slot of the baseplate, securing it properly to ensure reliable backplane pin engagement. Verify that the power supply can adequately provide the required 670 mA load from the +5 VDC supply before powering on the system.
Global Express Shipping
Returns & Warranty
Manufacturer: General Electric
Product No.: IC693CPU360
Country of origin:United States
Product Type: CPU Module
Payment: T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months
The General Electric IC693CPU360 is a high-performance single-slot central processing unit module designed specifically for the Series 90-30 programmable logic controller platform. Powered by an 80386EX microprocessor operating at a speed of 25 MHz, this CPU module delivers reliable execution speeds with a typical scan rate of 0.22 milliseconds per 1K of Boolean logic contacts. It provides extensive memory capacity supporting up to 240K bytes of user program memory (dependent on firmware release and configured word memory allocations) and utilizes both RAM and Flash memory storage.
This controller module supports a maximum system configuration of up to 8 baseplates, combining a CPU baseplate with up to 7 expansion and/or remote baseplates. It features a built-in serial port utilizing the PLC power supply connector that natively supports SNP and SNP-X slave protocols. For advanced communication requirements, the unit supports LAN multidrop connectivity as well as optional communication modules including Ethernet, FIP, Profibus, GBC, GCM, and GCM+.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Product Catalog Number | IC693CPU360 |
| Product Type | Single-Slot CPU Module |
| Series | Series 90-30 |
| Processor Type | 80386EX |
| Processor Speed | 25 MHz |
| Power Supply Load Requirement | 670 mA from +5 VDC supply |
| Maximum User Program Memory | Up to 240K Bytes (Firmware Release 9.0+) |
| Discrete Inputs (%I) / Outputs (%Q) | 2,048 points / 2,048 points |
| Internal Coils (%M) | 4,096 bits |
| Typical Scan Rate | 0.22 ms per 1K Boolean contacts |
| Baseplate Capacity | Up to 8 baseplates per system |
| Built-in Serial Ports | 1 port (SNP slave and SNP-X slave protocols) |
| Memory Storage Type | RAM and Flash |
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Country of Origin | United States |
The IC693CPU360 module occupies a single slot on the Series 90-30 CPU baseplate. It features one built-in serial port that interfaces through the connector located on the PLC power supply, supporting SNP and SNP-X slave protocols directly. Additional communication expansions are supported via backplane connectivity for LAN multidrop, as well as optional plug-in modules such as Ethernet, Profibus, FIP, GBC, GCM, and GCM+ modules.
Ensure all power to the Series 90-30 baseplate is turned off before installing or removing the CPU module. Insert the module firmly into the designated CPU slot of the baseplate, securing it properly to ensure reliable backplane pin engagement. Verify that the power supply can adequately provide the required 670 mA load from the +5 VDC supply before powering on the system.
| Product Image | Model Number / Title | Condition | Availability | Action |
|---|---|---|---|---|
|
General Electric IC693CHS398 5-Slot Expansion Baseplate | Original New | In Stock | View Details |
|
General Electric IC693PCM311 Series 90-30 Programmable Coprocessor Module | Original New | In Stock | View Details |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Un quadro di controllo inattivo non significa automaticamente che l’alimentatore sia guasto. Questa guida sul campo utilizza controlli dell’ingresso, a vuoto, sotto carico, dell’ondulazione, del...
Un controllo affidabile inizia prima che il PLC esegua un ciclo. Questa guida di ingegneria segue la catena del segnale dal rilevamento e dal condizionamento fino alla trasmissione, all’azione di...
Modbus è ancora ampiamente utilizzato perché il suo modello dati è semplice, non perché ogni implementazione lo sia. Questa guida spiega i frame, la mappatura dei registri, la temporizzazione, la...
Una guida pratica di ingegneria al funzionamento della CPU di un PLC, dai cicli di scansione deterministici e dalle tabelle delle immagini degli I/O fino a memoria, comunicazioni, diagnostica,...
Sostituire un 1756-L73 non significa automaticamente aggiornare il firmware. Questa guida confronta le versioni 19.013, 21.011 e 31.011, concentrandosi sulla compatibilità dei progetti, sulle...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
