Processing critical serial data streams within industrial control architectures, the Honeywell 51304362-350 acts as a dedicated Serial Interface I/O Processor designed for high-reliability automation platforms. This module handles point-to-point and multi-drop serial communications, offloading communication overhead from the primary controller to maintain optimal deterministic performance across the system bus. Equipped with a high-grade conformal coating, the assembly is shielded with a resilient protective layer that resists the degrading effects of high humidity, ambient moisture, and airborne chemical contaminants common in heavy processing environments.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Honeywell |
| Model Number | 51304362-350 |
| Product Type | Serial Interface I/O Processor (SI IOP) |
| Capacity | 16 Points per Port |
| Conformal Coating | Yes (Fully coated assembly) |
| CE Compliance | Compliant |
| Net Weight | 0.58 kg |
| Shipping Weight (Calculated) | 2.00 kg |
The 51304362-350 directly replaces non-CE compliant variations of the Honeywell Serial Interface Processor within equivalent chassis slot configurations. When retrofitting legacy systems, ensure that companion Field Termination Assemblies (FTAs) match the electrical characteristics and baud rate limits expected by this specific processor revision.
Avoid hot-swapping this I/O processor without verifying the slot state in the controller configuration utility, as sudden bus disruption can lead to subsystem communication timeouts and subsequent safety shutdowns. Keep in mind that conformal coatings degrade if subjected to localized temperatures exceeding standard cabinet operating limits; maintain adequate forced-air ventilation within the enclosure.
When connecting serial links to associated Field Termination Assemblies, verify that shielded cabling is grounded at only one end—typically the cabinet entry point—to prevent ground loops that introduce electrical noise into the communication signals. Ensure firmware compatibility between the primary controller and this specific hardware revision to guarantee seamless register mapping.
Isolate all electrical power sources supplying the card file and connected field wiring prior to inserting or removing the processor card. Failure to completely de-energize the system can result in severe equipment damage, unpredictable system behavior, or personal injury due to arc flash risks.
Confirm the card file slot allocation matches the system configuration parameters defined in your engineering project.
Align the PCB edge connector carefully with the card guides in the designated slot of the I/O chassis.
Push the card firmly into the backplane connector until the retaining mechanisms engage securely.
Secure all terminal blocks and verify shielding connections before energizing the cabinet power distribution unit.
Global Express Shipping
Returns & Warranty
Manufacturer: Honeywell
Product No.: 51304362-350
Country of origin:United States
Product Type: Serial Interface I/O Processors
Payment: T/T, Western Union
Weight: 580g
Shipping port: Xiamen
Warranty: 12 months
Processing critical serial data streams within industrial control architectures, the Honeywell 51304362-350 acts as a dedicated Serial Interface I/O Processor designed for high-reliability automation platforms. This module handles point-to-point and multi-drop serial communications, offloading communication overhead from the primary controller to maintain optimal deterministic performance across the system bus. Equipped with a high-grade conformal coating, the assembly is shielded with a resilient protective layer that resists the degrading effects of high humidity, ambient moisture, and airborne chemical contaminants common in heavy processing environments.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Honeywell |
| Model Number | 51304362-350 |
| Product Type | Serial Interface I/O Processor (SI IOP) |
| Capacity | 16 Points per Port |
| Conformal Coating | Yes (Fully coated assembly) |
| CE Compliance | Compliant |
| Net Weight | 0.58 kg |
| Shipping Weight (Calculated) | 2.00 kg |
The 51304362-350 directly replaces non-CE compliant variations of the Honeywell Serial Interface Processor within equivalent chassis slot configurations. When retrofitting legacy systems, ensure that companion Field Termination Assemblies (FTAs) match the electrical characteristics and baud rate limits expected by this specific processor revision.
Avoid hot-swapping this I/O processor without verifying the slot state in the controller configuration utility, as sudden bus disruption can lead to subsystem communication timeouts and subsequent safety shutdowns. Keep in mind that conformal coatings degrade if subjected to localized temperatures exceeding standard cabinet operating limits; maintain adequate forced-air ventilation within the enclosure.
When connecting serial links to associated Field Termination Assemblies, verify that shielded cabling is grounded at only one end—typically the cabinet entry point—to prevent ground loops that introduce electrical noise into the communication signals. Ensure firmware compatibility between the primary controller and this specific hardware revision to guarantee seamless register mapping.
Isolate all electrical power sources supplying the card file and connected field wiring prior to inserting or removing the processor card. Failure to completely de-energize the system can result in severe equipment damage, unpredictable system behavior, or personal injury due to arc flash risks.
Confirm the card file slot allocation matches the system configuration parameters defined in your engineering project.
Align the PCB edge connector carefully with the card guides in the designated slot of the I/O chassis.
Push the card firmly into the backplane connector until the retaining mechanisms engage securely.
Secure all terminal blocks and verify shielding connections before energizing the cabinet power distribution unit.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
