Providing precise speed and torque control for industrial three-phase motors, the Lenze E82EV371_2B is a modular frequency inverter designed for high-efficiency operation within automated architectures. This unit, belonging to the respected 8200 Vector series, delivers a rated power output of 0.37 kW and features integrated interference suppression measures to maintain electromagnetic compatibility in demanding electrical environments.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Reference | E82EV371_2B (E82EV371K2B) |
| Product Series | 8200 Vector |
| Mains Connection Voltage | 3 x 230 V AC |
| Rated Power Output | 0.37 kW |
| Interference Suppression | Integrated filter measures |
| Product Lifecycle Phase | Phase-Out (Legacy support active) |
| Dimensions (W x H x D) | 6.00 x 14.00 x 12.00 cm |
| Net Weight | 0.80 kg |
| Commodity Code | 85044095 |
| Export Control Classification | ECCN: N |
| Terminal Designation | Functional Assignment |
|---|---|
| L1, L2, L3 | 3-Phase AC Mains Input Connection (230 V) |
| U, V, W | 3-Phase Motor Output Connection |
| PE | Protective Earth Grounding Terminal |
The E82EV371_2B is functionally identical to the model reference E82EV371K2B, where the "K" designates the decimal placement for its 0.37 kW rating. When replacing older 8200 series units, ensure that any pluggable communication modules (such as CANopen or PROFIBUS FIF modules) are retained and transferred to the replacement unit, as the base power module does not include communication interfaces by default.
Because this VFD is in its legacy phase-out lifecycle, thermal management is critical when retrofitting older enclosures. Ensure a minimum clearance of 100 mm above and below the drive to prevent heat buildup, as the internal heatsink relies heavily on unobstructed vertical convection currents.
To maintain the effectiveness of the integrated interference suppression filter, always use low-capacitance shielded motor cables. The shield must be grounded with a 360-degree metal clamp directly to the mounting plate as close to the drive's PE terminal as possible to minimize high-frequency electromagnetic interference.
Isolate all electrical power sources before commencing installation or maintenance. After disconnecting the mains supply, wait at least 5 minutes for the internal DC-bus capacitors to discharge completely to safe voltage levels before touching any electrical terminals.
Mount the drive vertically on a flat, conductive, and grounded metal mounting plate inside an IP54 or higher rated control cabinet.
Connect the protective earth (PE) conductor to the designated grounding terminal before making any other wiring connections.
Wire the 3-phase 230 V AC mains input to terminals L1, L2, and L3, and the motor leads to terminals U, V, and W using shielded cables.
Global Express Shipping
Returns & Warranty
Manufacturer: Lenze
Product No.: E82EV371_2B
Country of origin:Germany
Product Type: Variable Frequency Drives
Barcode: 85044095
Payment: T/T, Western Union
Weight: 800g
Dimensions: 6.00 x 14.00 x 12.00 cm
Shipping port: Xiamen
Warranty: 12 months
Providing precise speed and torque control for industrial three-phase motors, the Lenze E82EV371_2B is a modular frequency inverter designed for high-efficiency operation within automated architectures. This unit, belonging to the respected 8200 Vector series, delivers a rated power output of 0.37 kW and features integrated interference suppression measures to maintain electromagnetic compatibility in demanding electrical environments.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Reference | E82EV371_2B (E82EV371K2B) |
| Product Series | 8200 Vector |
| Mains Connection Voltage | 3 x 230 V AC |
| Rated Power Output | 0.37 kW |
| Interference Suppression | Integrated filter measures |
| Product Lifecycle Phase | Phase-Out (Legacy support active) |
| Dimensions (W x H x D) | 6.00 x 14.00 x 12.00 cm |
| Net Weight | 0.80 kg |
| Commodity Code | 85044095 |
| Export Control Classification | ECCN: N |
| Terminal Designation | Functional Assignment |
|---|---|
| L1, L2, L3 | 3-Phase AC Mains Input Connection (230 V) |
| U, V, W | 3-Phase Motor Output Connection |
| PE | Protective Earth Grounding Terminal |
The E82EV371_2B is functionally identical to the model reference E82EV371K2B, where the "K" designates the decimal placement for its 0.37 kW rating. When replacing older 8200 series units, ensure that any pluggable communication modules (such as CANopen or PROFIBUS FIF modules) are retained and transferred to the replacement unit, as the base power module does not include communication interfaces by default.
Because this VFD is in its legacy phase-out lifecycle, thermal management is critical when retrofitting older enclosures. Ensure a minimum clearance of 100 mm above and below the drive to prevent heat buildup, as the internal heatsink relies heavily on unobstructed vertical convection currents.
To maintain the effectiveness of the integrated interference suppression filter, always use low-capacitance shielded motor cables. The shield must be grounded with a 360-degree metal clamp directly to the mounting plate as close to the drive's PE terminal as possible to minimize high-frequency electromagnetic interference.
Isolate all electrical power sources before commencing installation or maintenance. After disconnecting the mains supply, wait at least 5 minutes for the internal DC-bus capacitors to discharge completely to safe voltage levels before touching any electrical terminals.
Mount the drive vertically on a flat, conductive, and grounded metal mounting plate inside an IP54 or higher rated control cabinet.
Connect the protective earth (PE) conductor to the designated grounding terminal before making any other wiring connections.
Wire the 3-phase 230 V AC mains input to terminals L1, L2, and L3, and the motor leads to terminals U, V, and W using shielded cables.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
