Providing precise speed and torque regulation for industrial three-phase AC induction motors, the Lenze E82EV751_2B serves as a reliable vector-controlled variable frequency drive within the legacy 8200 Vector series. This compact drive module is engineered for space-saving control cabinet installation, delivering robust performance in demanding automation architectures. It supports both single-phase and three-phase mains connections, making it highly adaptable to various field power configurations.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Number | E82EV751_2B (E82EV751K2B) |
| Product Series | 8200 Vector |
| Input Voltage Phase | 1(3)/PE AC |
| Input Voltage Range | 230 / 240 V |
| Input Current | 9.0 A (1-phase) / 5.2 A (3-phase) |
| Input Frequency | 50 / 60 Hz |
| Output Voltage Phase | 3/PE AC |
| Output Voltage Range | 0 to 230 / 240 V |
| Output Current | 4.0 A |
| Output Power Rating | 0.75 kW (1.0 HP) |
| Output Frequency Range | 0 to 650 Hz |
| Product Lifecycle Phase | Phase-Out (Legacy) |
| Dimensions (H x W x D) | 24.0 x 16.2 x 30.6 cm |
| Net Weight | 0.74 kg |
| Shipping Weight (Calculated) | 1.20 kg |
| Commodity Code | 85044086 |
| Terminal / Port | Function / Circuit Assignment |
|---|---|
| L1, N/L2, L3 | Mains supply input connections (Single-phase or Three-phase) |
| U, V, W | Motor output connection terminals |
| PE | Protective Earth ground connections |
| AIF Slot | Automation Interface for keypad (EMZ8201BB) or communication modules (EMF2102IB) |
The E82EV751_2B is often designated in PLM systems under the code E82EV751K2B. It is fully compatible with the Lenze EMZ8201BB parameterization keypad and the EMF2102IB LECOM-A (RS232/RS485) communication module. When replacing an older 8200 Standard series drive, note that the 8200 Vector series uses a different parameter structure, requiring a manual transfer of settings rather than a direct copy-paste via older software versions.
As a legacy phase-out model, thermal management is critical to preserving the unit's internal DC-bus capacitors. Ensure a minimum vertical mounting clearance of 100 mm above and below the drive. Continuous operation at the maximum 4.0 A output current in ambient temperatures exceeding 40 degC will accelerate capacitor degradation; external cabinet cooling or derating is highly recommended in these environments.
Always use low-capacitance, shielded motor cables to minimize high-frequency leakage currents. The cable shield must be grounded over a large surface area directly to the conductive mounting plate using grounding clamps. To prevent electromagnetic interference, never route control cables parallel to motor power cables; maintain a minimum physical separation of 10 cm.
Mount the drive vertically on a flat, vibration-free conductive mounting plate inside the control cabinet to ensure proper heat dissipation and grounding.
Connect the protective earth (PE) conductor to the designated ground terminal before making any other electrical connections.
Wire the AC mains input to terminals L1/N (for single-phase) or L1/L2/L3 (for three-phase) and the motor output to terminals U/V/W.
Insert the required control module or keypad into the front AIF slot, ensuring it clicks securely into place before applying power.
Global Express Shipping
Returns & Warranty
Manufacturer: Lenze
Product No.: E82EV751_2B
Country of origin:Germany
Product Type: Variable Frequency Drives
Barcode: 85044086
Payment: T/T, Western Union
Weight: 740g
Dimensions: 24.0 x 16.2 x 30.6 cm
Shipping port: Xiamen
Warranty: 12 months
Providing precise speed and torque regulation for industrial three-phase AC induction motors, the Lenze E82EV751_2B serves as a reliable vector-controlled variable frequency drive within the legacy 8200 Vector series. This compact drive module is engineered for space-saving control cabinet installation, delivering robust performance in demanding automation architectures. It supports both single-phase and three-phase mains connections, making it highly adaptable to various field power configurations.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Number | E82EV751_2B (E82EV751K2B) |
| Product Series | 8200 Vector |
| Input Voltage Phase | 1(3)/PE AC |
| Input Voltage Range | 230 / 240 V |
| Input Current | 9.0 A (1-phase) / 5.2 A (3-phase) |
| Input Frequency | 50 / 60 Hz |
| Output Voltage Phase | 3/PE AC |
| Output Voltage Range | 0 to 230 / 240 V |
| Output Current | 4.0 A |
| Output Power Rating | 0.75 kW (1.0 HP) |
| Output Frequency Range | 0 to 650 Hz |
| Product Lifecycle Phase | Phase-Out (Legacy) |
| Dimensions (H x W x D) | 24.0 x 16.2 x 30.6 cm |
| Net Weight | 0.74 kg |
| Shipping Weight (Calculated) | 1.20 kg |
| Commodity Code | 85044086 |
| Terminal / Port | Function / Circuit Assignment |
|---|---|
| L1, N/L2, L3 | Mains supply input connections (Single-phase or Three-phase) |
| U, V, W | Motor output connection terminals |
| PE | Protective Earth ground connections |
| AIF Slot | Automation Interface for keypad (EMZ8201BB) or communication modules (EMF2102IB) |
The E82EV751_2B is often designated in PLM systems under the code E82EV751K2B. It is fully compatible with the Lenze EMZ8201BB parameterization keypad and the EMF2102IB LECOM-A (RS232/RS485) communication module. When replacing an older 8200 Standard series drive, note that the 8200 Vector series uses a different parameter structure, requiring a manual transfer of settings rather than a direct copy-paste via older software versions.
As a legacy phase-out model, thermal management is critical to preserving the unit's internal DC-bus capacitors. Ensure a minimum vertical mounting clearance of 100 mm above and below the drive. Continuous operation at the maximum 4.0 A output current in ambient temperatures exceeding 40 degC will accelerate capacitor degradation; external cabinet cooling or derating is highly recommended in these environments.
Always use low-capacitance, shielded motor cables to minimize high-frequency leakage currents. The cable shield must be grounded over a large surface area directly to the conductive mounting plate using grounding clamps. To prevent electromagnetic interference, never route control cables parallel to motor power cables; maintain a minimum physical separation of 10 cm.
Mount the drive vertically on a flat, vibration-free conductive mounting plate inside the control cabinet to ensure proper heat dissipation and grounding.
Connect the protective earth (PE) conductor to the designated ground terminal before making any other electrical connections.
Wire the AC mains input to terminals L1/N (for single-phase) or L1/L2/L3 (for three-phase) and the motor output to terminals U/V/W.
Insert the required control module or keypad into the front AIF slot, ensuring it clicks securely into place before applying power.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
