Description

This is a SIMATIC Panel PC 670, model 6AV7724-3BC10-0AD0, manufactured by Siemens. It is a standard configuration industrial computer designed for human-machine interface (HMI) and control applications. This unit features a 15.1-inch color TFT touchscreen display, a Pentium III 1.26 GHz processor, and is equipped with 512 MB of SDRAM. It includes a 40 GB EIDE hard drive, a DVD-ROM drive, and comes pre-installed with a multi-language version of the Windows 2000 operating system.

Features

• 15.1-inch color TFT display with integrated touchscreen for operator input.
• Powered by a Pentium III processor operating at 1.26 GHz.
• Equipped with 512 MB of SDRAM-133 memory.
• Includes a 40 GB EIDE hard disk drive for data and application storage.
• Features an internal DVD-ROM drive for software installation and data access.
• Pre-loaded with Windows 2000 operating system (multi-language).
• Supports a wide input voltage range of 115-230V AC.

Applications

• Process visualization and control
• Machine-level data acquisition and logging
• Factory automation HMI stations
• Industrial control cabinet integration

Technical Specifications

Installation Guidelines

1. 1
   Prepare Mounting Location: Ensure the panel cutout dimensions are correct for the PC 670 chassis. The mounting surface must be flat, clean, and capable of supporting the unit's weight (12.00 kg). Verify adequate clearance for ventilation and cable routing at the rear of the unit.
2. 2
   Mount the Unit: Insert the Panel PC into the prepared cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
3. 3
   Establish Protective Earth Ground: Connect the dedicated protective earth (PE) terminal on the PC chassis to the main control cabinet ground bus. Use a low-impedance conductor of the appropriate gauge. This connection is critical for safety and noise immunity.
4. 4
   Connect Power: With the main power source de-energized, connect the AC power cable to the unit's power input socket. Ensure the source voltage (115-230V AC) matches the unit's rating. Secure the cable to prevent accidental disconnection.
5. 5
   Connect Peripherals: Connect all required interface cables, such as Ethernet, serial (COM), and USB. Route cables neatly and secure them to avoid strain on the connectors. After all connections are verified, remove the LOTO device and apply power to the unit for commissioning.