Description

The Siemens 6AV7614-0AA20-0BH0 is a SIMATIC Panel PC 670, an integrated operator panel designed for industrial control and visualization tasks. This unit is equipped with a 15-inch TFT touch display, a 300 MHz Celeron CPU, and is configured with 128 MB of RAM and a 20 GB hard drive. It is designed to operate on a 115-230V AC power supply and comes pre-installed with the German language version of Windows NT 4.0. This model is supplied with a U.S. mains cable.

Features

• 15-inch TFT color display with touch functionality
• Intel Celeron processor operating at 300 MHz
• 128 MB of installed RAM
• 20 GB internal hard drive for data and application storage
• Wide input voltage range of 115-230V AC
• Pre-loaded with Windows NT 4.0 (German)

Applications

• Human-Machine Interface (HMI) for machine control
• Process visualization and monitoring in manufacturing
• Data acquisition and logging on the plant floor
• Supervisory control systems in industrial automation

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet or panel cutout dimensions match the Panel PC's mounting requirements. Verify adequate clearance for ventilation and cable routing at the rear of the unit.
2. 2 Insert the Panel PC into the cutout from the front. Secure it evenly using all provided mounting clamps to ensure a proper seal and prevent mechanical stress on the chassis. Do not overtighten the clamps.
3. 3 Connect the chassis to the cabinet's protective earth (PE) ground using a low-impedance connection. This is critical for both safety and noise immunity.
4. 4 Connect the 115-230V AC power supply using the provided mains cable to a stable, correctly-rated power source. Ensure the source is protected by an appropriate circuit breaker.
5. 5 Connect all required communication and I/O cables. Route cables away from high-voltage lines to minimize electrical noise. Ensure all connectors are fully seated and secured.