Pengilang: BECKHOFF
No. Produk: CP2618-0000
Negara asal:Jerman
Jenis Produk: Panel PCs
Pembayaran: T/T, Western Union
Berat: 500g
Dimensi: 550 x 380 x 150 mm
Pelabuhan penghantaran: Xiamen
Jaminan: 12 bulan
Process monitoring and human-machine interface demands are met with industrial reliability by the Beckhoff CP2618-0000, a high-efficiency built-in Panel PC configured with a widescreen multi-finger touch interface. Designed for space-saving control cabinet integration, this unit combines an ARM Cortex-A8 (1 GHz) processor with a highly durable glass-front display to deliver a robust operator terminal for automated production lines. Operating on Windows Embedded Compact 7, the Panel PC is highly optimized to run TwinCAT 2 or TwinCAT 3 runtime engines, providing a cost-effective platform for compact PLC and motion control projects.
| Parameter | Specification |
|---|---|
| Manufacturer | Beckhoff Automation |
| Model Series | CP26xx Built-in Panel PC |
| Part Number / SKU | CP2618-0000 |
| Processor | ARM Cortex-A8, 1 GHz |
| System Memory | 1 GB DDR3 RAM |
| Storage | 1 slot for microSD (512 MB standard, expandable up to 16 GB) |
| Persistent Memory | 128 KB NOVRAM |
| Display Size & Type | 18.5-inch multi-touch (projected capacitive) |
| Display Resolution | 1366 x 768 pixels |
| Power Supply | 24 V DC |
| Operating System | Windows Embedded Compact 7 (English) |
| Protection Class | IP65 Front, IP20 Rear |
| Operating Temperature | 0 to 55 degC |
| Country of Origin | Germany |
| Shipping Weight (Calculated) | 5.0 kg |
| Package Dimensions (Calculated) | 550 x 380 x 150 mm |
| Interface Connection | Function / Assignment |
|---|---|
| Ethernet (1 x RJ45) | 10/100BASE-T on-board industrial LAN port |
| EtherCAT (1 x RJ45) | Dedicated on-board EtherCAT terminal controller interface |
| USB 2.0 (Rear) | 2 x USB 2.0 Type A ports for external peripherals |
| RS232 | 1 x D-sub 9-pin serial channel interface |
| Power Input | 3-pin male connector for 24 V DC power configuration |
The CP2618-0000 uses a 32-bit ARM RISC architecture running Windows Embedded Compact 7 (WEC7). Note that software applications compiled for x86/x64 environments will not run on this processor without re-compiling for ARM. For migration paths from legacy systems, verify that your TwinCAT library extensions have direct ARM-compatible runtimes before swapping physical panel configurations.
To prevent premature wear on the storage media, do not write continuous historical trend logs directly to the microSD card. Leverage the 128 KB NOVRAM persistent memory to store active cycle parameters, and route high-frequency diagnostics or historical logging over the network interface to a centralized database server.
When routing the dedicated EtherCAT cable to the CP2618 rear interface, use CAT5e shielded twisted pair cabling at minimum. Standard non-shielded patch cables risk inducing electromagnetic noise from high-frequency servo drives, leading to sync losses and control cycle timeouts. Ensure the mounting clamps are torqued down evenly to maintain the integrity of the front IP65 sealing gasket against the cutout cabinet plate.
CRITICAL WARNING:
Isolate and completely lock out the main power source before performing panel integration. Verify zero voltage presence at the supply cables before terminating the 24 V DC supply plug into the panel rear. Failure to follow industrial de-energization procedures risks equipment damage and electrical shock.
Prepare a cabinet cutout precisely matching the mechanical installation dimensions of the 18.5" CP2618 housing.
Check that the sealing gasket is correctly seated around the back lip of the front bezel, then insert the unit carefully into the cutout.
Secure the panel in place using the supplied tension brackets, ensuring uniform tension to maintain the IP65 ingress seal.
Connect a low-resistance chassis ground wire to the rear grounding bolt prior to connecting the main 24 V DC power connector.
Penghantaran Ekspres Global
Pemulangan & Jaminan
Pesanan diproses dan dihantar Isnin-Jumaat (tidak termasuk cuti umum).
Untuk kelayakan penuh, yuran penyimpanan semula, dan butiran pemulangan antarabangsa, sila lihat rasmi kami Polisi Pemulangan & Pengembalian Wang .
| Country of origin |
Jerman
|
Artikel ini menerangkan bagaimana aktuator elektrik bersepadu, seperti siri e-Actuator SMC, mengubah kawalan gerakan industri dengan menggantikan sistem pneumatik dan hidraulik tradisional. Ia...
Artikel ini menerangkan bagaimana sistem PLC melaksanakan operasi matematik teras seperti penambahan, penolakan, pendaraban, pembahagian, modulo, dan perpangkatan dalam automasi industri. Ia...
Artikel ini menerangkan beberapa fungsi logik Boolean lanjutan yang digunakan dalam pengaturcaraan PLC selain operasi asas AND, OR, dan NOT. Ia merangkumi bagaimana alat seperti jadual kebenaran,...
Logik Boolean adalah asas bagi setiap program PLC. Dari kawalan mesin yang mudah hingga sistem automasi industri yang kompleks, pintu logik menentukan bagaimana pengawal bertindak balas terhadap...
Firewall industri memainkan peranan penting dalam keselamatan siber OT, melindungi rangkaian PLC, DCS, dan SCADA melalui segmentasi, kawalan masuk/keluar, dan integrasi IDS/IPS yang selaras dengan...
Pengapit robotik moden sedang berkembang melebihi rahang mekanikal tradisional. Daripada sistem pelekat yang diinspirasikan oleh cicak dan pengapit lembut gred makanan hingga alat gudang yang...
