Bently Nevada 330101-00-11-20-02-05 3300 XL 8 mm Proximity Probe

Description

The Bently Nevada 330101-00-11-20-02-05 is a high-reliability, non-contacting 8 mm proximity probe designed for critical machinery vibration and shaft position measurements in industrial rotating assets. This specific model features a fully threaded 3/8-24 UNF steel body without armor, configured with 0.0 inches of unthreaded length and a compact 1.1-inch overall case length. It is supplied with a 2.0-meter (6.6-foot) standard coaxial cable terminated with a miniature coaxial ClickLoc connector and is certified for explosive environments with full CSA, ATEX, and IECEx approvals.

Operating on the eddy-current principle, this probe detects target movement with micro-inch precision when paired with a matching 3300 XL Proximitor sensor and extension cable. Unlike armored configurations or those equipped with physical connector protectors, this non-armored variant is designed for narrow spaces inside bearing housings where extra physical shielding is not needed and mechanical clearance is highly restricted.

Features

• 8 mm tip diameter proximity probe engineered for non-contacting displacement and shaft vibration measurements.
• Fully threaded 3/8-24 UNF-2A stainless steel probe body for high mechanical strength and corrosion resistance.
• Compact 1.1-inch overall case length with 0.0 inches of unthreaded length, optimized for tight clearances.
• 2.0-meter (6.6-foot) standard coaxial cable with integrated miniature ClickLoc coaxial connector.
• High-temperature resilience with an operating and storage temperature range of -52 degC to +177 degC.
• Agency approval option 05 provides native compliance for CSA, ATEX, and IECEx hazardous area classes.

Applications

• Radial vibration and axial thrust position measurements on steam and gas turbines.
• Rotor displacement monitoring on high-pressure centrifugal compressors, fans, and pumps.
• Differential expansion and casing expansion measurements.
• Speed and phase reference detection (Keyphasor applications).
• Permanent protective interlocks on critical industrial rotating machinery.

Ordering Information

Technical Specifications

Installation Guidelines

• Mount the probe with the appropriate probe gap according to your specific 3300 XL Proximitor system calibration standards (typically 1.27 mm / 50 mils nominal gap).
• Ensure the threaded case is secured inside the mounting bracket so that thread engagement does not exceed maximum allowable limits (0.563 in maximum engagement for 3/8-24 thread).
• Route the standard probe cable using proper shielding, grounding, and conduit practices to avoid electromagnetic interference or physical abrasion against the bearing housing.
• Do not expose the probe tip or casing to extreme chemical solutions (very low or high pH) to prevent degradation of the integrated Viton O-ring pressure seal.

Compliance and Certifications

• ATEX: Ex ia IIC T5...T1 Ga; Ex ia IIIC T90degC...T280degC Dc (for intrinsically safe zones)
• IECEx: Ex ia IIC T5...T1 Ga; Ex ec IIC T5...T1 Gc
• CSA: Class I, Division 1, Groups A, B, C, and D; Class II, Groups E, F, and G; Class III
• CE: Fully compliant with European electromagnetic compatibility and hazardous area regulations