Pengilang: Omron
No. Produk: CS1H-CPU63H
Negara asal:Jepun
Jenis Produk: PLC CPU Modules
Pembayaran: T/T, Western Union
Berat: 500g
Dimensi: 160 mm x 140 mm x 80 mm
Pelabuhan penghantaran: Xiamen
Jaminan: 12 bulan
Executing complex industrial automation sequences, the Omron CS1H-CPU63H serves as a high-performance central processing unit within the modular CS1 series programmable logic controller architecture. This unit manages high-speed processing, large-scale data registration, and extensive I/O distribution across multiple expansion racks. Built to interface seamlessly with advanced motion control, serial communications, and network modules, the processor features dedicated peripheral and RS-232C interfaces for local maintenance, programming, and host link communications.
| Specification Parameter | Value / Details |
|---|---|
| Manufacturer | Omron |
| Model Series | CS1 Series (CS1H) |
| Program Capacity | 20 Ksteps |
| Data Memory Capacity | 64 Kwords (DM: 32 Kwords, EM: 32 Kwords x 1 bank) |
| I/O Points / Bits | 5,120 bits (Up to 7 Expansion Racks) |
| LD Instruction Processing Speed | 0.02 microseconds |
| Built-in Communication Interfaces | Peripheral Port, RS-232C Port (D-sub 9-pin female) |
| Current Consumption | 1.10 A at 5 VDC |
| Operating Temperature Range | 0 to 55 degC |
| Country of Origin | Japan |
| Shipping Weight (Calculated) | 0.55 kg (excluding packaging) / 2.50 kg (gross shipping weight) |
| Package Dimensions (Calculated) | 160 mm x 140 mm x 80 mm |
The integrated RS-232C interface utilizes a standard D-sub 9-pin female connector configured for serial communication, Modbus RTU, or host link connectivity. Pin assignments are structured as follows:
| Connector Pin / Terminal | Signal Abbreviation | Function / Circuit Assignment |
|---|---|---|
| Pin 1 | FG | Frame Ground (Shield Connection) |
| Pin 2 | SD (TXD) | Send Data / Transmit |
| Pin 3 | RD (RXD) | Receive Data |
| Pin 4 | RS (RTS) | Request to Send |
| Pin 5 | CS (CTS) | Clear to Send |
| Pin 9 | SG (GND) | Signal Ground |
The CS1H-CPU63H is a direct successor to legacy CS1H-CPU63 modules. While backplane footprints remain identical, program migration to the 'H' suffix CPU requires CX-Programmer version 3.0 or higher to correctly access enhanced instruction sets and utilize the faster CPU bus speed characteristics.
With an internal current draw of 1.10 A on the 5 VDC rail, system engineers must run a strict power-balance budget for the chosen backplane. Combining high-density input modules, analog units, and communication modules on the same chassis may cause voltage drops if using standard power supply units like the PA204. Upgrade to a PA207R power supply if the total internal 5 VDC demand exceeds 80% of the power supply's output rating.
The front dip switch cover conceals configuration switches. Set Dip Switch 4 to the 'OFF' position to use custom communication parameters for the RS-232C port. Leaving Switch 4 'ON' forces the port to default to standard host link auto-detect configuration, which can overwrite custom serial protocol parameters defined in the PLC setup parameters.
CRITICAL WARNING
Do not insert or remove this central processing unit while the backplane power supply is turned on. Live-plugging will result in permanent damage to the CPU bus interface, internal flash memory corruption, or complete control system failure.
Isolate the primary incoming power source feeding the CS1 system power supply module and verify zero-voltage status.
Align the top and bottom guides of the CS1H-CPU63H module into the dedicated CPU slot (usually the leftmost slot next to the power supply unit).
Carefully push the unit straight into the backplane connector until the locking mechanisms click and lock securely into position.
Attach the standard ground wire to the backplane's grounding terminal and tighten the terminal to 1.2 N-m torque to prevent industrial EMI noise issues.
Penghantaran Ekspres Global
Pemulangan & Jaminan
Pesanan diproses dan dihantar Isnin-Jumaat (tidak termasuk cuti umum).
Untuk kelayakan penuh, yuran penyimpanan semula, dan butiran pemulangan antarabangsa, sila lihat rasmi kami Polisi Pemulangan & Pengembalian Wang .
| Country of origin |
Jepun
|
Artikel ini menerangkan bagaimana aktuator elektrik bersepadu, seperti siri e-Actuator SMC, mengubah kawalan gerakan industri dengan menggantikan sistem pneumatik dan hidraulik tradisional. Ia...
Artikel ini menerangkan bagaimana sistem PLC melaksanakan operasi matematik teras seperti penambahan, penolakan, pendaraban, pembahagian, modulo, dan perpangkatan dalam automasi industri. Ia...
Artikel ini menerangkan beberapa fungsi logik Boolean lanjutan yang digunakan dalam pengaturcaraan PLC selain operasi asas AND, OR, dan NOT. Ia merangkumi bagaimana alat seperti jadual kebenaran,...
Logik Boolean adalah asas bagi setiap program PLC. Dari kawalan mesin yang mudah hingga sistem automasi industri yang kompleks, pintu logik menentukan bagaimana pengawal bertindak balas terhadap...
Firewall industri memainkan peranan penting dalam keselamatan siber OT, melindungi rangkaian PLC, DCS, dan SCADA melalui segmentasi, kawalan masuk/keluar, dan integrasi IDS/IPS yang selaras dengan...
Pengapit robotik moden sedang berkembang melebihi rahang mekanikal tradisional. Daripada sistem pelekat yang diinspirasikan oleh cicak dan pengapit lembut gred makanan hingga alat gudang yang...
