Pengilang: Omron
No. Produk: E5EN-HPRR2BM-500
Negara asal:Jepun
Jenis Produk: Digital Temperature Controllers
Pembayaran: T/T, Western Union
Berat: 2000g
Dimensi: 96 mm x 48 mm x 78 mm
Pelabuhan penghantaran: Xiamen
Jaminan: 12 bulan
Designed to execute precise closed-loop thermal processes, the Omron E5EN-HPRR2BM-500 is an advanced digital temperature controller featuring position-proportional control and dual relay outputs. This 1/8 DIN panel-mounted instrument integrates auxiliary outputs, event inputs, and an optional unit mounting interface to accommodate complex industrial thermal profiles. Built with non-volatile memory protection rated for up to 1,000,000 write cycles, it ensures configuration security in volatile power environments. The controller comes equipped with a rear terminal cover to meet industrial touch-safe requirements and features a high-grade IP66-rated front panel for resistance to dust and water ingress.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Omron |
| Model Number | E5EN-HPRR2BM-500 |
| Control Mode | Position-proportional control |
| Control Output 1 | Relay output (Valve open) |
| Control Output 2 | Relay output (Valve close) |
| Auxiliary Outputs | 2 Independent SPST-NO relay outputs |
| Event Inputs | 2 Inputs (dry contact) |
| Power Supply Voltage | 100 to 240 VAC, 50/60 Hz |
| Operating Voltage Range | 85% to 110% of rated supply voltage |
| Power Consumption | 12 VA maximum (at 100 to 240 VAC) |
| Memory Protection | Non-volatile memory (1,000,000 write cycles) |
| Ingress Protection Rating | Front panel: IP66, Rear case: IP20, Terminals: IP00 |
| Dimensions (H x W x D) | 96 mm x 48 mm x 78 mm (1/8 DIN) |
| Shipping Weight (Calculated) | 2.0 kg (including packaging and protective materials) |
| Terminal Block Section | Terminal Assignment & Function |
|---|---|
| AC Power Supply | Terminals 1 & 2 (100 to 240 VAC supply line) |
| Control Output 1 (Open) | Terminals 3 & 4 (Relay output for motorized valve open action) |
| Control Output 2 (Close) | Terminals 5 & 6 (Relay output for motorized valve close action) |
| Auxiliary Outputs 1 & 2 | Dedicated SPST-NO outputs for auxiliary alarm indicators |
| Event Inputs | Discrete connections for multi-SP switching or run/stop transitions |
The "H" designation marks the high-performance E5EN variant. Unlike standard E5EN versions, the H-series provides rapid sampling loops (60 ms), improved loop diagnostics, and standard physical modularity options. Ensure your existing controller utilizes position-proportional (P) valve control prior to drop-in swap-outs; replacing standard analog/SSR output E5EN units with this relay-based proportional model requires structural actuator wiring modifications.
Under position-proportional control modes, motorized actuator dead-band configuration is critical. Setting an excessively tight dead-band causes relay "chattering" or constant minor adjustments, leading to early mechanical relay fatigue. For heavy industrial service, establish the "Mot Time" (motor calibration time) accurately to reflect the full-travel duration of your control valve from 0% to 100% open.
To protect against electrical noise interference with low-level sensor signals, physical separation of high-voltage relay wiring and thermal input circuits must be maintained in the wire duct. Ground all shielded thermocouple or RTD extension wires at a single point inside the main panel, rather than at the controller's terminal block.
Prepare a standard 1/8 DIN panel cutout measuring precisely 92 mm (+0.8 mm/-0 mm) wide by 45 mm (+0.6 mm/-0 mm) high.
Insert the E5EN-HPRR2BM-500 through the front panel cutout with the water-resistant rubber gasket securely positioned behind the bezel.
Slide the mounting adapter brackets onto the controller body from the rear, tightening screws evenly to compress the front-panel gasket to IP66 standards.
Complete terminal connections following the designated schematic, apply the -500 rear terminal cover, and verify snug screw terminals to secure contact integrity.
Penghantaran Ekspres Global
Pemulangan & Jaminan
Pesanan diproses dan dihantar Isnin-Jumaat (tidak termasuk cuti umum).
Untuk kelayakan penuh, yuran penyimpanan semula, dan butiran pemulangan antarabangsa, sila lihat rasmi kami Polisi Pemulangan & Pengembalian Wang .
| Country of origin |
Jepun
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
Artikel ini menerangkan bagaimana sistem PLC melaksanakan operasi matematik teras seperti penambahan, penolakan, pendaraban, pembahagian, modulo, dan perpangkatan dalam automasi industri. Ia...
Artikel ini menerangkan beberapa fungsi logik Boolean lanjutan yang digunakan dalam pengaturcaraan PLC selain operasi asas AND, OR, dan NOT. Ia merangkumi bagaimana alat seperti jadual kebenaran,...
Logik Boolean adalah asas bagi setiap program PLC. Dari kawalan mesin yang mudah hingga sistem automasi industri yang kompleks, pintu logik menentukan bagaimana pengawal bertindak balas terhadap...
Firewall industri memainkan peranan penting dalam keselamatan siber OT, melindungi rangkaian PLC, DCS, dan SCADA melalui segmentasi, kawalan masuk/keluar, dan integrasi IDS/IPS yang selaras dengan...
Pengapit robotik moden sedang berkembang melebihi rahang mekanikal tradisional. Daripada sistem pelekat yang diinspirasikan oleh cicak dan pengapit lembut gred makanan hingga alat gudang yang...
