ABB 3BHE036348R0102 XZ C826 A102 Interface Card

Module Overview

The ABB 3BHE036348R0102 XZ C826 A102 is an industrial interface card strip engineered specifically for specialized signal routing and condition status tracking within high-power excitation or power converter architectures. Functioning as a high-density peripheral card, this ABB 3BHE036348R0102 unit—frequently classified by field engineers under the unspaced XZC826A102 part designation—manages localized terminal connection paths and front-panel status indications. Built on a narrow, strip-style printed circuit profile (PCB type XZ C826 A / 3BHE036349), the hardware provides physical connection bridging and multi-channel isolation barriers between the system main processing cards and remote field sensor lines.

Functional Attributes

• Narrow Card Strip Geometry: Optimized structural footprint design engineered to slide vertically into modular drive subracks, maximizing panel layout efficiency.
• Double-Index Nomenclature (XZ C826 A / XZC826A): Guarantees accurate database indexing and quick procurement identification for engineering procurement specialists using varied spacing formats.
• Low-Latency Bridge Processing: Delivers deterministic data pathways to support sub-forty-millisecond measurement update cycles when mated with the core drive backplane network.
• Integrated Status Matrix: Features pre-allocated diagnostic point arrays on the board surface to facilitate fast on-site troubleshooting and visual alignment verification.

Target Deployments

• UNIT TYPE XZ C826 A Subracks: Acts as the dedicated front-end or rear-termination interface module inside modular excitation cabinets.
• High-Power Variable Speed Converters: Deployed as an isolation and terminal-protection card layer to condition input/output telemetry in high electromagnetic noise environments.
• Intrinsically Safe Control Segments: Utilized across power plants and heavy process lines requiring strict low-power loops to prevent terminal short-circuit propagation.

Technical Specifications

On-Site Slot Installation Guidelines

1. 1 Affix an approved ESD grounding strap to your wrist and connect the alligator clip to a bare metallic point on the system panel frame before opening the protective box.
2. 2 Inspect the vertical rack alignment tracks. Carefully insert the top and bottom card edge profiles into the designated system guide channels.
3. 3 Slide the module backward with uniform pressure until the multi-pin terminal blocks or plug headers seat tightly into the system backplane assembly.
4. 4 Secure the integrated retention fasteners to guarantee a stable frame ground path. Re-engage external field wire plugs before enabling auxiliary power distribution circuits.