Engineered for space-saving control cabinet installation, the Beckhoff C6930-0050 industrial PC serves as a compact, high-performance controller for complex automation and processing tasks. This unit integrates a robust industrial motherboard within a compact housing designed for rear-wall mounting. All operational connectors, status LEDs, and maintenance access points are located on the front panel, simplifying installation, diagnostic checks, and hardware servicing within cramped enclosures.
| Parameter | Specification |
|---|---|
| Manufacturer | Beckhoff |
| Model Reference | C6930-0050 |
| Protection Class | IP20 |
| Operating Temperature | 0 to 55 degC (ambient) |
| Drive Bays | 2x 2.5-inch HDD/SSD slots, 1x CFast slot |
| Expansion Slots | 2x PCIe module slots |
| Cooling Type | Front-accessible dual ball bearing fan cartridge with speed control |
| Device Dimensions (W x H x D) | 90 x 235 x 121 mm (without mounting plate) |
| Net Weight | 2.1 kg |
| Shipping Weight (Calculated) | 3.0 kg |
The C6930-0050 is designed to integrate seamlessly into existing Beckhoff TwinCAT control structures. Ensure that the motherboard generation configuration matches your TwinCAT runtime license levels, particularly when migrating projects from older C6915 or C6920 series platforms.
Maintaining clear vertical space of at least 5 cm (2 inches) above and below the device is mandatory. Impeding this convective flow paths risks localized thermal buildup, which will cause automatic fan speed escalation and potential thermal throttling under peak processor loads.
Ensure that the mounting sheet at the rear wall of the cabinet is electrically grounded to the common functional earth bar. This establishes a low-impedance ground path for electromagnetic interference (EMI) suppression across the front-facing communication interfaces.
Isolate all electrical supply circuits feeding the control cabinet before initiating mechanical mounting or interface wiring. Verify that the system is fully de-energized to prevent electrical shock or damage to the internal processing units.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: C6930-0050
Country of origin:Germany
Product Type: Control Cabinet Industrial PCs
Payment: T/T, Western Union
Weight: 3000g
Dimensions: 90 x 235 x 121 mm
Shipping port: Xiamen
Warranty: 12 months
Engineered for space-saving control cabinet installation, the Beckhoff C6930-0050 industrial PC serves as a compact, high-performance controller for complex automation and processing tasks. This unit integrates a robust industrial motherboard within a compact housing designed for rear-wall mounting. All operational connectors, status LEDs, and maintenance access points are located on the front panel, simplifying installation, diagnostic checks, and hardware servicing within cramped enclosures.
| Parameter | Specification |
|---|---|
| Manufacturer | Beckhoff |
| Model Reference | C6930-0050 |
| Protection Class | IP20 |
| Operating Temperature | 0 to 55 degC (ambient) |
| Drive Bays | 2x 2.5-inch HDD/SSD slots, 1x CFast slot |
| Expansion Slots | 2x PCIe module slots |
| Cooling Type | Front-accessible dual ball bearing fan cartridge with speed control |
| Device Dimensions (W x H x D) | 90 x 235 x 121 mm (without mounting plate) |
| Net Weight | 2.1 kg |
| Shipping Weight (Calculated) | 3.0 kg |
The C6930-0050 is designed to integrate seamlessly into existing Beckhoff TwinCAT control structures. Ensure that the motherboard generation configuration matches your TwinCAT runtime license levels, particularly when migrating projects from older C6915 or C6920 series platforms.
Maintaining clear vertical space of at least 5 cm (2 inches) above and below the device is mandatory. Impeding this convective flow paths risks localized thermal buildup, which will cause automatic fan speed escalation and potential thermal throttling under peak processor loads.
Ensure that the mounting sheet at the rear wall of the cabinet is electrically grounded to the common functional earth bar. This establishes a low-impedance ground path for electromagnetic interference (EMI) suppression across the front-facing communication interfaces.
Isolate all electrical supply circuits feeding the control cabinet before initiating mechanical mounting or interface wiring. Verify that the system is fully de-energized to prevent electrical shock or damage to the internal processing units.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
