Description

The BECKHOFF CP6601-0000-0020 is a compact, fanless Built-in Panel PC designed for high-efficiency machine-level control, monitoring, and HMI visualization tasks. This industrial-grade controller seamlessly integrates a high-quality 12-inch TFT display with an SVGA resolution of 800 x 600 pixels and a resistive single-finger touch screen, providing an intuitive, dependable physical interface for operators in rugged environment setups.

At the core of the processor unit is an ARM Cortex-A8 processor running at 1 GHz, mounted on a 3½-inch motherboard. Outfitted with 1 GB DDR3 RAM and a dedicated microSD slot for expandable solid-state flash memory, the system provides responsive local execution. To ensure data security in volatile industrial environments, the controller features 128 KB of non-volatile NOVRAM for persistent parameter storage during sudden power interruptions.

The mechanical build is engineered for panel-mount deployment, featuring a robust aluminum front with a sheet-steel rear cover. Installation is streamlined via integrated, pull-out clamping levers that eliminate loose mounting components. Connectivity options include on-board Ethernet and dedicated EtherCAT ports alongside dual USB 2.0 and serial interfaces, making the hardware versatile and ready for modern industrial communication architectures.

Features

• Low-power ARM Cortex-A8 1 GHz processor for reliable, fanless continuous operation.
• 12-inch SVGA TFT display with single-finger resistive touch control.
• 1 GB DDR3 system memory and dedicated microSD storage card slot.
• 128 KB NOVRAM non-volatile memory to prevent critical data loss.
• Dual network architecture featuring 10/100BASE-T Ethernet and on-board EtherCAT interface.
• Integrated 1-second UPS powered by the main 24 V DC supply.
• Rugged IP65-rated aluminum front panel with IP20-rated sheet-steel rear enclosure.

Applications

• Machine-level visualization and local HMI control interfaces.
• Distributed PLC control nodes using TwinCAT runtime architectures.
• Real-time motion control and network master interfacing via EtherCAT.
• Embedded data acquisition and protocol gateway routing.

Technical Specifications

General

Performance & Processing

Display & Interface

Electrical & Connectivity

Mechanical & Environmental

Installation Guidelines

1. Ensure all electrical supplies are fully de-energized before mounting or servicing the Panel PC.
2. Prepare the control cabinet cutout in strict compliance with the dimensions specified for the 12-inch display enclosure.
3. Carefully insert the Panel PC into the front of the cutout, checking that the outer sealing gasket lies completely flat against the mounting plate to preserve the IP65 seal.
4. Slide and lock the built-in pull-out clamping levers from the rear to secure the device without loose mounting screws.
5. Connect the 24 V DC power cable to the specified supply terminal block, verifying correct polarity.
6. Connect the network, USB, and serial interfaces using shielded cables designed to mitigate electromagnetic interference.
7. Verify system grounding by establishing a direct connection between the chassis ground terminal and the main control cabinet backplane.