Bently Nevada 128277-01C is a half-height future-expansion faceplate for closing an unused half-height front position in a 3500 machinery protection rack. The part preserves the rack’s finished front arrangement while a position is intentionally left without an electronic module.
Product identification
| Manufacturer |
Bently Nevada |
| Part number |
128277-01C |
| Product type |
Half-height future-expansion faceplate |
| System family |
3500 Machinery Protection System |
| Function |
Covers an unused half-height front rack position |
| Electrical function |
None |
| Approximate product envelope |
120 × 50 × 30 mm; confirm the supplied revision |
| Historical reference mass |
Approximately 0.04 kg |
Receiving and installation checks
- Match the complete 128277-01C marking; 128276 and 128277 faceplates are separate accessory identities even though both are described as half-height expansion panels.
- Compare height, width, fastener positions and finish with the intended front rack position before installation.
- Confirm from the rack drawing that the position is intentionally unused. A blank faceplate must not conceal a missing required monitor or rear I/O module.
- Inspect mounting screws and rack threads and tighten only enough to secure the panel without distortion.
- The linked manufacturer document is a 3500 family reference. Use the part marking and project records to confirm the exact accessory.
Dimensions and shipping
Existing product data indicates an approximate envelope of 120 × 50 × 30 mm and a historical reference mass near 0.04 kg. Estimated packed size: 18 × 12 × 7 cm. Estimated shipping weight: 0.25 kg. Confirm actual carton dimensions and gross weight before air shipment.