Engineered for seamless integration into critical machinery protection frameworks, the Bently Nevada 136180-01 acts as a highly reliable communication hub for the 3500 monitoring platform. This module is designed to translate and transmit rack monitor data, including direct values, status alerts, and diagnostic variables, to plant-wide control systems without introducing latency. By functioning as the digital bridge within the 3500/92 interface setup, it enables real-time observation of machinery health directly from centralized operational interfaces.
| Parameter | Value / Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number (SKU) | 136180-01 |
| Associated Main Module | 3500/92 Communication Gateway |
| Communication Interfaces | Ethernet (10Base-T/100Base-TX), RS232 / RS422 / RS485 Serial |
| Protocols Supported | Modbus TCP/IP, Modbus RTU |
| Country of Origin | United States |
| Shipping Weight (Calculated) | 3.0 kg |
Alternative Models & Compatibility: The 136180-01 card is the primary processor internal component of the 3500/92 module. It functions in conjunction with specific I/O modules installed in the back of the rack. Verify that your system's backplane configuration matches either the Ethernet/Serial configuration or the dual-serial layout to ensure firmware compatibility.
Application Pitfalls & Engineering Notes: When operating multiple master interfaces on Modbus TCP, polling frequencies must be managed conservatively. High-frequency sweeps (under 100 milliseconds) by multiple client devices simultaneously can saturate the internal processing queue of the gateway card, leading to intermittent connection timeouts or watchdog resets.
Commissioning & Wiring Tips: If utilizing RS485 serial communication over long distances, ensure that terminating resistors (typically 120 ohms) are correctly enabled at the physical end-of-line nodes. Always run high-quality shielded twisted-pair (STP) cabling separate from high-voltage conduit lines to minimize electromagnetic noise coupling on serial channels.
Ensure the 3500 rack system is completely de-energized before mounting the main module.
Align the card with the designated chassis tracks and slide it inward until the connectors are firmly seated in the backplane.
Tighten the front panel retaining screws to secure the unit within the chassis frame.
Apply power to the rack, connect your network link, and verify diagnostic status LEDs before initiating software parameter configuration.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 136180-01
Country of origin:United States
Product Type: PLC Communication Modules
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
Engineered for seamless integration into critical machinery protection frameworks, the Bently Nevada 136180-01 acts as a highly reliable communication hub for the 3500 monitoring platform. This module is designed to translate and transmit rack monitor data, including direct values, status alerts, and diagnostic variables, to plant-wide control systems without introducing latency. By functioning as the digital bridge within the 3500/92 interface setup, it enables real-time observation of machinery health directly from centralized operational interfaces.
| Parameter | Value / Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number (SKU) | 136180-01 |
| Associated Main Module | 3500/92 Communication Gateway |
| Communication Interfaces | Ethernet (10Base-T/100Base-TX), RS232 / RS422 / RS485 Serial |
| Protocols Supported | Modbus TCP/IP, Modbus RTU |
| Country of Origin | United States |
| Shipping Weight (Calculated) | 3.0 kg |
Alternative Models & Compatibility: The 136180-01 card is the primary processor internal component of the 3500/92 module. It functions in conjunction with specific I/O modules installed in the back of the rack. Verify that your system's backplane configuration matches either the Ethernet/Serial configuration or the dual-serial layout to ensure firmware compatibility.
Application Pitfalls & Engineering Notes: When operating multiple master interfaces on Modbus TCP, polling frequencies must be managed conservatively. High-frequency sweeps (under 100 milliseconds) by multiple client devices simultaneously can saturate the internal processing queue of the gateway card, leading to intermittent connection timeouts or watchdog resets.
Commissioning & Wiring Tips: If utilizing RS485 serial communication over long distances, ensure that terminating resistors (typically 120 ohms) are correctly enabled at the physical end-of-line nodes. Always run high-quality shielded twisted-pair (STP) cabling separate from high-voltage conduit lines to minimize electromagnetic noise coupling on serial channels.
Ensure the 3500 rack system is completely de-energized before mounting the main module.
Align the card with the designated chassis tracks and slide it inward until the connectors are firmly seated in the backplane.
Tighten the front panel retaining screws to secure the unit within the chassis frame.
Apply power to the rack, connect your network link, and verify diagnostic status LEDs before initiating software parameter configuration.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
