The Bently Nevada 330180-X0-00 is a 3300 XL 5/8 mm Proximitor Sensor configured as MOD 161255-02 for a 5-metre proximity transducer system.
The sensor is compatible with 5 mm and 8 mm Bently Nevada 3300 and 3300 XL proximity probes. It converts the probe signal into a voltage proportional to the distance between the probe tip and the observed conductive target.
The MOD 161255-02 configuration is marked with an output scale factor of 7.87 V/mm (200 mV/mil) and a linear range of -10 to -90 mils. The specified electrical zero is -3 Vdc at 20 mils.
The module provides OUT, COM, and VT terminals, with the supply terminal identified as -24 Vdc. The observed target material for this MOD configuration is specified as Inconel 625.
3300 XL 5/8 mm Proximitor Sensor
Part number 330180-X0-00
MOD configuration 161255-02
Designed for a 5-metre proximity transducer system
Compatible with 5 mm and 8 mm 3300 probes
Compatible with 5 mm and 8 mm 3300 XL probes
Output scale factor of 7.87 V/mm (200 mV/mil)
Linear range of -10 to -90 mils
Electrical zero of -3 Vdc at 20 mils
OUT, COM, and -24 Vdc supply terminals
MOD calibration identified for Inconel 625
Shaft radial vibration measurement
Shaft displacement monitoring
Shaft position measurement
Machinery protection systems
Rotating equipment condition monitoring
Replacement of an existing 330180-X0-00 with matching MOD configuration
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330180-X0-00 |
| MOD Number | 161255-02 |
| Product Type | Proximitor Sensor |
| Product Family | 3300 XL 5/8 mm |
| System Length | 5 m |
| Compatible Probe Families | 5 mm and 8 mm 3300 / 3300 XL |
| Parameter | Specification |
|---|---|
| Output Scale Factor | 7.87 V/mm (200 mV/mil) |
| Linear Range | -10 to -90 mils |
| Electrical Zero | -3 Vdc at 20 mils |
| Supply Terminal | VT (-24 Vdc) |
| Signal Terminals | OUT, COM, VT |
| Parameter | Specification |
|---|---|
| Modification | 161255-02 |
| Observed Target Material | Inconel 625 |
| System Identification | 5 MTR SYS |
| Terminal | Function |
|---|---|
| OUT | Proximitor sensor output |
| COM | Common |
| VT | -24 Vdc supply |
Verify both 330180-X0-00 and MOD 161255-02 before replacement.
Confirm the installed proximity system uses the required 5-metre system length.
Match the probe family and system configuration before connecting the sensor.
Preserve existing OUT, COM, and VT wiring identification during replacement.
Confirm the -24 Vdc supply before energizing the module.
Verify probe gap and output voltage after installation.
Confirm the measured response against the existing machinery monitoring configuration.
Do not select a replacement only by the base part number 330180-X0-00.
Match MOD 161255-02 where the existing installation uses this calibration.
Confirm system length, probe type, scale factor, and target material before substitution.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330180-X0-00 161255-02
Country of origin:United States
Product Type: Proximitor Sensor
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
The Bently Nevada 330180-X0-00 is a 3300 XL 5/8 mm Proximitor Sensor configured as MOD 161255-02 for a 5-metre proximity transducer system.
The sensor is compatible with 5 mm and 8 mm Bently Nevada 3300 and 3300 XL proximity probes. It converts the probe signal into a voltage proportional to the distance between the probe tip and the observed conductive target.
The MOD 161255-02 configuration is marked with an output scale factor of 7.87 V/mm (200 mV/mil) and a linear range of -10 to -90 mils. The specified electrical zero is -3 Vdc at 20 mils.
The module provides OUT, COM, and VT terminals, with the supply terminal identified as -24 Vdc. The observed target material for this MOD configuration is specified as Inconel 625.
3300 XL 5/8 mm Proximitor Sensor
Part number 330180-X0-00
MOD configuration 161255-02
Designed for a 5-metre proximity transducer system
Compatible with 5 mm and 8 mm 3300 probes
Compatible with 5 mm and 8 mm 3300 XL probes
Output scale factor of 7.87 V/mm (200 mV/mil)
Linear range of -10 to -90 mils
Electrical zero of -3 Vdc at 20 mils
OUT, COM, and -24 Vdc supply terminals
MOD calibration identified for Inconel 625
Shaft radial vibration measurement
Shaft displacement monitoring
Shaft position measurement
Machinery protection systems
Rotating equipment condition monitoring
Replacement of an existing 330180-X0-00 with matching MOD configuration
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330180-X0-00 |
| MOD Number | 161255-02 |
| Product Type | Proximitor Sensor |
| Product Family | 3300 XL 5/8 mm |
| System Length | 5 m |
| Compatible Probe Families | 5 mm and 8 mm 3300 / 3300 XL |
| Parameter | Specification |
|---|---|
| Output Scale Factor | 7.87 V/mm (200 mV/mil) |
| Linear Range | -10 to -90 mils |
| Electrical Zero | -3 Vdc at 20 mils |
| Supply Terminal | VT (-24 Vdc) |
| Signal Terminals | OUT, COM, VT |
| Parameter | Specification |
|---|---|
| Modification | 161255-02 |
| Observed Target Material | Inconel 625 |
| System Identification | 5 MTR SYS |
| Terminal | Function |
|---|---|
| OUT | Proximitor sensor output |
| COM | Common |
| VT | -24 Vdc supply |
Verify both 330180-X0-00 and MOD 161255-02 before replacement.
Confirm the installed proximity system uses the required 5-metre system length.
Match the probe family and system configuration before connecting the sensor.
Preserve existing OUT, COM, and VT wiring identification during replacement.
Confirm the -24 Vdc supply before energizing the module.
Verify probe gap and output voltage after installation.
Confirm the measured response against the existing machinery monitoring configuration.
Do not select a replacement only by the base part number 330180-X0-00.
Match MOD 161255-02 where the existing installation uses this calibration.
Confirm system length, probe type, scale factor, and target material before substitution.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
