Bently Nevada 16710-09 330400 Series Interconnect Cable

Description

The 16710-09 is a high-quality, 3-conductor shielded interconnect cable designed for use with Bently Nevada 330400 and 330425 acceleration transducers. This cable provides a reliable signal path for critical machinery vibration monitoring, featuring a 3-socket plug at the sensor end and stripped terminal lugs at the instrumentation end for secure connections.

This configuration, identified by the 09 length code, provides a cable length of 9.0 ft (2.7 m). The 22 AWG (0.5 mm2) conductor construction is optimized for demanding industrial environments, supporting accurate transmission of acceleration signals from the transducer to the monitoring system. The cable is designed for installation in protected enclosures and conduit systems.

Features

• Length: 9.0 ft (2.7 m)
• Cable Type: 3-conductor, shielded 22 AWG (0.5 mm2)
• Connector (Sensor End): 3-socket plug
• Connector (Instrumentation End): Terminal lugs
• Compatibility: Designed specifically for 330400 and 330425 Accelerometer Acceleration Transducers
• Shielding: Integrated shielding to minimize electromagnetic interference

Applications

• Critical machinery vibration monitoring (e.g., gear mesh monitoring)
• Casing acceleration measurements
• Industrial rotating machinery protection systems
• Hazardous and non-hazardous area acceleration sensor loops

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the cable is routed through protective conduit to maintain signal integrity in industrial environments. Avoid bending the cable sharply near the connector interface. When connecting the terminal lugs to the monitoring system, verify that shield grounds are terminated according to the specific site grounding requirements for the 330400 series instrumentation. Ensure the sensor-end connector is fully seated to maintain ingress protection.