Bently Nevada 16925-26 Interconnect Cable

Description

The 16925-26 is a high-quality 3-conductor shielded 22 AWG (0.5 mm2) interconnect cable designed for critical machinery casing vibration monitoring. This specific configuration features a total length of 26 ft (7.9 m), equipped with a 3-socket plug at one end and terminal lugs at the other end for secure, reliable signal transmission.

Used primarily to connect 330400 and 330425 series acceleration transducers to vibration monitoring systems, this cable ensures signal integrity in demanding industrial environments. The durable design includes a shielded construction to minimize electromagnetic interference, supporting the accurate delivery of acceleration data from the accelerometer on the machine housing or bearing cap back to the monitoring instrumentation.

Features

• 3-conductor shielded 22 AWG (0.5 mm2) construction
• 3-socket plug connector at one end
• Terminal lugs at the other end for direct termination
• Optimized for use with 330400 and 330425 acceleration transducers
• Durable shielding to protect signal integrity in high-EMI environments
• Standardized 26 ft (7.9 m) length

Applications

• Critical machinery protection and monitoring
• Casing acceleration measurements
• Gear mesh and bearing housing vibration analysis
• Industrial machinery in petrochemical, power generation, and water treatment sectors

Ordering Information

Technical Specifications

Installation Guidelines

For optimal performance, install the 16925-26 cable within protective conduit to prevent physical damage and minimize environmental exposure. Ensure that the sensor end connector is fully seated to maintain signal integrity. Avoid routing signal cables near high-voltage power lines to minimize potential electromagnetic interference. When terminating the lug end, ensure clean, secure contact at the terminal block to maintain the accuracy of the vibration monitoring system.