Option 085 (8.5 m cable length) and Option 02 (Standard cable with connector protector) specify this 3300 XL Standard Extension Cable configuration — 330130-085-02-00. This non-contacting transducer system component connects a 3300 XL 8 mm proximity probe to a 3300 XL Proximitor sensor. The 8.5-meter cable matches with a 0.5-meter proximity probe to form a total system length of 9.0 meters, maintaining electrical calibration and signal integrity.
Option 02 specifies pre-installed fluorosilicone connector protectors that isolate the miniature coaxial ClickLoc connections from wet, dirty, or oily environments. Unlike option 00 (unprotected standard cable) or option 01 (armored cable), this configuration offers environmental sealing without the additional weight of stainless steel armor. The gold-plated ClickLoc connectors provide a secure, locking mechanical interface that prevents self-loosening and requires only finger-tight torque for installation.
Used on critical rotating machinery for monitoring parameters such as shaft radial vibration, axial thrust position, eccentricity, and rotational speed. Typical applications include gas and steam turbines, centrifugal compressors, gearboxes, industrial pumps, cooling tower fans, generators, and electric motors in the power generation, petrochemical, water treatment, and heavy processing industries.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330130-085-02-00 | 3300 XL Standard Extension Cable |
| A - Cable Length | 085 | 8.5 meters (27.9 feet) |
| B - Connector Protector and Cable Option | 02 | Standard cable with connector protector |
| C - Agency Approval Option | 00 | Not required |
| Parameter | Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330130-085-02-00 |
| Cable Length | 8.5 meters (27.9 feet) |
| Cable Type | Coaxial, standard with FEP jacket |
| Connector Protector | Pre-installed fluorosilicone protectors |
| Connector Type | Corrosion-resistant ClickLoc (male/female) |
| Core Resistance (R_CORE) | 1.87 +/- 0.28 Ohm (center conductor) |
| Jacket Resistance (R_JACKET) | 0.56 +/- 0.11 Ohm (outer conductor) |
| Capacitance | 69.9 pF/m (typical) |
| Characteristic Impedance | 75 Ohm nominal |
| Tensile Strength | 330 N (75 lbf) maximum pull strength |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Operating Temperature Range | -52 to +177 degC (-62 to +350 degF) |
| Agency Approvals | None required (Option 00) |
| Weight | 0.32 kg (320 g) |
| Dimensions | 220 mm x 220 mm x 35 mm (H x W x D) (Coiled Package) |
| Connector Interface | Connection Target | Connector Style |
|---|---|---|
| Male Coaxial Connector | Proximitor Sensor Input Terminal | Miniature Coaxial ClickLoc (Gold-Plated) |
| Female Coaxial Connector | Proximity Probe Lead Cable | Miniature Coaxial ClickLoc (Gold-Plated) |
Keep the extension cable coiled neatly and avoid sharp bends that exceed the 25.4 mm (1.0 inch) minimum bend radius limit. When connecting the ClickLoc connectors, tighten them finger-tight only until a distinct click is felt, indicating that the locking mechanism is engaged. For environmental shielding, slide the pre-installed connector protector sleeve fully over the connection. Do not run the extension cable in close proximity to high-voltage lines, and use dedicated protective conduit if physical damage from surrounding equipment is possible.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330130-085-02-00
Country of origin:United States
Product Type: 3300 XL Standard Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 320g
Dimensions: 220 mm x 220 mm x 35 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 085 (8.5 m cable length) and Option 02 (Standard cable with connector protector) specify this 3300 XL Standard Extension Cable configuration — 330130-085-02-00. This non-contacting transducer system component connects a 3300 XL 8 mm proximity probe to a 3300 XL Proximitor sensor. The 8.5-meter cable matches with a 0.5-meter proximity probe to form a total system length of 9.0 meters, maintaining electrical calibration and signal integrity.
Option 02 specifies pre-installed fluorosilicone connector protectors that isolate the miniature coaxial ClickLoc connections from wet, dirty, or oily environments. Unlike option 00 (unprotected standard cable) or option 01 (armored cable), this configuration offers environmental sealing without the additional weight of stainless steel armor. The gold-plated ClickLoc connectors provide a secure, locking mechanical interface that prevents self-loosening and requires only finger-tight torque for installation.
Used on critical rotating machinery for monitoring parameters such as shaft radial vibration, axial thrust position, eccentricity, and rotational speed. Typical applications include gas and steam turbines, centrifugal compressors, gearboxes, industrial pumps, cooling tower fans, generators, and electric motors in the power generation, petrochemical, water treatment, and heavy processing industries.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330130-085-02-00 | 3300 XL Standard Extension Cable |
| A - Cable Length | 085 | 8.5 meters (27.9 feet) |
| B - Connector Protector and Cable Option | 02 | Standard cable with connector protector |
| C - Agency Approval Option | 00 | Not required |
| Parameter | Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330130-085-02-00 |
| Cable Length | 8.5 meters (27.9 feet) |
| Cable Type | Coaxial, standard with FEP jacket |
| Connector Protector | Pre-installed fluorosilicone protectors |
| Connector Type | Corrosion-resistant ClickLoc (male/female) |
| Core Resistance (R_CORE) | 1.87 +/- 0.28 Ohm (center conductor) |
| Jacket Resistance (R_JACKET) | 0.56 +/- 0.11 Ohm (outer conductor) |
| Capacitance | 69.9 pF/m (typical) |
| Characteristic Impedance | 75 Ohm nominal |
| Tensile Strength | 330 N (75 lbf) maximum pull strength |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Operating Temperature Range | -52 to +177 degC (-62 to +350 degF) |
| Agency Approvals | None required (Option 00) |
| Weight | 0.32 kg (320 g) |
| Dimensions | 220 mm x 220 mm x 35 mm (H x W x D) (Coiled Package) |
| Connector Interface | Connection Target | Connector Style |
|---|---|---|
| Male Coaxial Connector | Proximitor Sensor Input Terminal | Miniature Coaxial ClickLoc (Gold-Plated) |
| Female Coaxial Connector | Proximity Probe Lead Cable | Miniature Coaxial ClickLoc (Gold-Plated) |
Keep the extension cable coiled neatly and avoid sharp bends that exceed the 25.4 mm (1.0 inch) minimum bend radius limit. When connecting the ClickLoc connectors, tighten them finger-tight only until a distinct click is felt, indicating that the locking mechanism is engaged. For environmental shielding, slide the pre-installed connector protector sleeve fully over the connection. Do not run the extension cable in close proximity to high-voltage lines, and use dedicated protective conduit if physical damage from surrounding equipment is possible.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
