Engineered for seamless integration with machinery protection and condition monitoring architectures, the Bently Nevada 200350-02-00-CN operates as a high-performance acceleration transducer within the Trendmaster Pro system framework. This sensor detects high-frequency casing vibration, converting mechanical motion into proportional electrical signals for early fault diagnostics. The unit features an optimized piezoelectric design combined with onboard charge-amplification electronics, ensuring excellent signal-to-noise ratios even in electrically noisy industrial environments.
| Parameter | Value / Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model Number | 200350-02-00-CN |
| Product Series | Trendmaster Pro |
| Transducer Type | Piezoelectric Accelerometer |
| Mounting Thread Option (-02) | M6 x 1 Threaded Stud |
| Agency Approval Option (-00) | Standard / No hazardous area approvals |
| Regional Certification (-CN) | China RoHS / Regional Compliance |
| Housing Material | Stainless Steel |
| Electrical Connection | 3-pin circular receptacle |
| Shipping Weight (Calculated) | 0.25 kg |
| Package Dimensions (Calculated) | 12.0 cm x 8.0 cm x 5.0 cm |
The 200350-02-00-CN replaces legacy accelerometers within standard Trendmaster networks. It interfaces directly with Trendmaster Pro Flexi-Nodes and local DSM infrastructure. Ensure the selected mounting thread (M6 x 1) matches your machine housing; if a 1/4-28 UNF thread is required, refer to the 200350-01 option series.
Improper torque during installation represents the single most common cause of signal distortion or physical housing failure. Exceeding the specified mounting torque can shear the integrated M6 stud or warp the internal piezoelectric element, altering sensor sensitivity. Additionally, thermal expansion in high-temperature machinery must be accounted for to prevent thermal stress on the sensor casing.
Always verify that the mounting surface is machined flat (minimum 0.001 inches TIR) and free of paint, rust, or debris to ensure proper high-frequency transmission. Apply a light film of silicone lubricant or acoustic coupling fluid to the mating surface before torquing. Cable routing must employ adequate stress relief loops to prevent mechanical cable tension from introducing false noise spikes or bias voltage fluctuations into the data collector.
CRITICAL WARNING
Before beginning sensor installation, ensure the monitored machinery is completely de-energized, locked out, and tagged out. Never drill or tap mounting holes into pressurized casings, thin-walled structures, or areas housing internal electrical or mechanical components.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 200350-02-00-CN
Country of origin:United States
Product Type: Vibration Accelerometers
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 12.0 cm x 8.0 cm x 5.0 cm
Shipping port: Xiamen
Warranty: 12 months
Engineered for seamless integration with machinery protection and condition monitoring architectures, the Bently Nevada 200350-02-00-CN operates as a high-performance acceleration transducer within the Trendmaster Pro system framework. This sensor detects high-frequency casing vibration, converting mechanical motion into proportional electrical signals for early fault diagnostics. The unit features an optimized piezoelectric design combined with onboard charge-amplification electronics, ensuring excellent signal-to-noise ratios even in electrically noisy industrial environments.
| Parameter | Value / Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model Number | 200350-02-00-CN |
| Product Series | Trendmaster Pro |
| Transducer Type | Piezoelectric Accelerometer |
| Mounting Thread Option (-02) | M6 x 1 Threaded Stud |
| Agency Approval Option (-00) | Standard / No hazardous area approvals |
| Regional Certification (-CN) | China RoHS / Regional Compliance |
| Housing Material | Stainless Steel |
| Electrical Connection | 3-pin circular receptacle |
| Shipping Weight (Calculated) | 0.25 kg |
| Package Dimensions (Calculated) | 12.0 cm x 8.0 cm x 5.0 cm |
The 200350-02-00-CN replaces legacy accelerometers within standard Trendmaster networks. It interfaces directly with Trendmaster Pro Flexi-Nodes and local DSM infrastructure. Ensure the selected mounting thread (M6 x 1) matches your machine housing; if a 1/4-28 UNF thread is required, refer to the 200350-01 option series.
Improper torque during installation represents the single most common cause of signal distortion or physical housing failure. Exceeding the specified mounting torque can shear the integrated M6 stud or warp the internal piezoelectric element, altering sensor sensitivity. Additionally, thermal expansion in high-temperature machinery must be accounted for to prevent thermal stress on the sensor casing.
Always verify that the mounting surface is machined flat (minimum 0.001 inches TIR) and free of paint, rust, or debris to ensure proper high-frequency transmission. Apply a light film of silicone lubricant or acoustic coupling fluid to the mating surface before torquing. Cable routing must employ adequate stress relief loops to prevent mechanical cable tension from introducing false noise spikes or bias voltage fluctuations into the data collector.
CRITICAL WARNING
Before beginning sensor installation, ensure the monitored machinery is completely de-energized, locked out, and tagged out. Never drill or tap mounting holes into pressurized casings, thin-walled structures, or areas housing internal electrical or mechanical components.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
