Engineered for high-accuracy shaft vibration, axial position, and rotational speed measurements on critical machinery, the Bently Nevada 21501-24-40-10-02 serves as a robust proximity vibration probe within industrial protection systems. This 5mm eddy current sensor transmits high-frequency signals to monitor dynamic motion and static position of target shafts relative to the probe tip, enabling early fault detection in rotating equipment. Designed to operate under severe temperature, pressure, and chemical exposure, it provides essential diagnostic inputs for continuous machinery health monitoring and emergency trip systems.
| Manufacturer | Bently Nevada |
| Part Number | 21501-24-40-10-02 |
| Probe Tip Diameter | 5 mm |
| Thread Size | 3/8-24 UNF (Standard) |
| Unthreaded Length (Option 24) | 2.4 inches |
| Overall Case Length (Option 40) | 4.0 inches (40 tenths of an inch / approximately 102 mm) |
| Total Length (Option 10) | 1.0 meter (3.9 inches nominal tolerance) |
| Connector Type (Option 02) | Miniature male coaxial connector |
| Measurement Type | Radial vibration, axial position, speed, and phase reference (keyphasor) |
| Country of Origin | United States (U.S.A.) |
| Shipping Weight | 3.0 kg (including protective packaging) |
| Connector Component | Function |
|---|---|
| Miniature Male Coaxial Pin | Transmits high-frequency RF signal from the probe coil to the Proximitor extension cable. |
| Coaxial Outer Shield | Provides system ground return and EMI shielding to prevent signal corruption. |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 21501-24-40-10-02
Country of origin:United States
Product Type: Proximity Probes
Payment: T/T, Western Union
Weight: 3000g
Shipping port: Xiamen
Warranty: 12 months
Engineered for high-accuracy shaft vibration, axial position, and rotational speed measurements on critical machinery, the Bently Nevada 21501-24-40-10-02 serves as a robust proximity vibration probe within industrial protection systems. This 5mm eddy current sensor transmits high-frequency signals to monitor dynamic motion and static position of target shafts relative to the probe tip, enabling early fault detection in rotating equipment. Designed to operate under severe temperature, pressure, and chemical exposure, it provides essential diagnostic inputs for continuous machinery health monitoring and emergency trip systems.
| Manufacturer | Bently Nevada |
| Part Number | 21501-24-40-10-02 |
| Probe Tip Diameter | 5 mm |
| Thread Size | 3/8-24 UNF (Standard) |
| Unthreaded Length (Option 24) | 2.4 inches |
| Overall Case Length (Option 40) | 4.0 inches (40 tenths of an inch / approximately 102 mm) |
| Total Length (Option 10) | 1.0 meter (3.9 inches nominal tolerance) |
| Connector Type (Option 02) | Miniature male coaxial connector |
| Measurement Type | Radial vibration, axial position, speed, and phase reference (keyphasor) |
| Country of Origin | United States (U.S.A.) |
| Shipping Weight | 3.0 kg (including protective packaging) |
| Connector Component | Function |
|---|---|
| Miniature Male Coaxial Pin | Transmits high-frequency RF signal from the probe coil to the Proximitor extension cable. |
| Coaxial Outer Shield | Provides system ground return and EMI shielding to prevent signal corruption. |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
