Manufacturer: Bently Nevada
Product No.: 21747-075-00
Country of origin:United States
Product Type: Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 700g
Dimensions: 30cm x 28cm x 4cm
Shipping port: Xiamen
Warranty: 12 months
The 21747-075-00 is an extension cable component designed for the 7200 proximity transducer system. This specific configuration features a 7.5 metre cable length and standard construction without protective armor. The cable acts as an electrical bridge between the 7200 series proximity probe and the Proximitor sensor, maintaining the characteristic impedance required for accurate displacement and vibration measurements.
Used in 7200 proximity transducer chains, this cable ensures signal integrity for shaft position and radial vibration monitoring on rotating machinery such as turbines, compressors, and electric motors. It is constructed to operate within a temperature range of -30 Celsius to +177 Celsius and is compatible with 5 mm and 8 mm 7200 series proximity probes.
| Orderable Part Number | 21747-075-00 | 7200 Series Extension Cable |
| Option 075 | 7.5 metres | Total system length configuration |
| Option 00 | Without armor | Standard cable construction |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Series | 7200 Series |
| Part Number | 21747-075-00 |
| Cable Type | 95 Ohm Coaxial |
| Length | 7.5 metres |
| Armor | None (Standard) |
| Operating Temperature | -30 Celsius to +177 Celsius |
| System Compatibility | 7200 5 mm and 8 mm Proximity Transducers |
When installing 7200 series extension cables, ensure the connection to the probe and Proximitor is tight to prevent signal degradation. Avoid sharp bends that exceed the minimum bend radius of the coaxial cable to maintain impedance stability. In hazardous environments, verify that the entire transducer chain (probe, extension cable, and Proximitor) meets the site-specific hazardous area classification requirements.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Commission IO-Link systematically from master addressing and port modes through IODD selection, PLC byte mapping, parameter backups, device validation, and failure-injection tests.
A practical PowerFlex braking guide covering regenerative energy, resistor resistance and duty cycle, thermal protection, model-specific parameters, and measured commissioning tests.
An industrial joystick is only the first element in a safe motion command chain. This guide covers sensing choices, wiring, signal validation, PLC logic, restart behavior, and commissioning for...
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
