Bently Nevada 330101-00-24-15-02-05 3300 XL 8 mm Proximity Probe

Description

The Bently Nevada 330101-00-24-15-02-05 is a high-performance 8 mm proximity probe belonging to the industry-standard 3300 XL Proximity Transducer System. This specific product configuration is engineered without armored protection, utilizing a standard 75 Ohm triaxial fluoroethylene propylene (FEP) insulated coaxial cable. Designed for critical machinery protection, this probe measures non-contact shaft vibration and displacement on high-speed rotating equipment. Unlike other variants that may feature connector protectors or armored protection, this model features a standard gold-plated miniature ClickLoc coaxial connector and a standard cable jacket. It is configured with a 0.0-inch unthreaded length (making the case fully threaded) and a 2.4-inch overall case length with 3/8-24 UNF threads. Possessing a total integrated cable length of 1.5 meters (4.9 feet), it integrates directly with a 3300 XL extension cable and a 330180 series Proximitor sensor to provide continuous, high-accuracy eddy-current dynamic measurements.

Features

• 8 mm tip diameter optimized for high-resolution eddy-current displacement measurements.
• Unarmored probe body construction for cost-effective installation in clean environments.
• Fully threaded 3/8-24 UNF case design with 0.0-inch unthreaded length to maximize installation versatility.
• 2.4-inch standard overall case length suited for typical bearing housing installations.
• 1.5-meter (4.9-foot) integrated standard FEP-insulated coaxial cable.
• Gold-plated miniature coaxial ClickLoc connector provides a reliable, vibration-resistant connection.
• Certified with multiple international hazardous area approvals including CSA, ATEX, and IECEx.
• Polyphenylene sulfide (PPS) probe tip offers robust insulation and excellent chemical resistance.
• AISI 303/304 stainless steel case material provides strong mechanical integrity.

Applications

• Radial shaft vibration monitoring on steam turbines, gas turbines, and generators.
• Axial thrust position and displacement monitoring on centrifugal compressors and high-pressure pumps.
• Rotor dynamic measurements and shaft centerline profiling on rotating machinery.
• Permanent machine protection systems for critical plant assets requiring hazardous area certification.

Ordering Information

Technical Specifications

Installation Guidelines

To ensure high measurement accuracy and long-term reliability under dynamic plant conditions, adhere to the following engineered guidelines:

• Set the appropriate probe gap against the target material using a digital multimeter connected to the Proximitor sensor output during static calibration.
• Avoid exceeding the maximum thread engagement length of 0.563 inches to prevent binding during mounting.
• Ensure the coaxial ClickLoc connectors are joined finger-tight only. Do not apply tools or pliers directly to gold click-type connectors.
• Maintain the minimum cable bend radius of 25.4 mm (1.0 inch) during routing to prevent core damage or electrical impedance changes.
• Ensure proper side-view clearance is maintained around the probe tip to prevent metallic structures from affecting the eddy-current field.

Compliance and Certifications

• CSA: Class I, Division 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III; Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga (when installed with certified barriers)
• ATEX/IECEx: II 1 G Ex ia IIC T5...T1 Ga; II 3 G Ex nA IIC T5...T1 Gc; Ex ec IIC T5...T1 Gc
• RoHS: Compliant