Bently Nevada 330101-00-47-10-02-00 3300 XL 8 mm Proximity Probe

Description

Option 00 (0.0 in unthreaded length) and Option 47 (4.7 in case length) define this specific configuration of the 330101-00-47-10-02-00 Bently Nevada 3300 XL 8 mm proximity probe. This non-contact, eddy-current transducer is a core component in the 3300 XL 8 mm monitoring chain, used to measure shaft vibration and axial position on critical rotating machinery such as turbines, compressors, and pumps.

This unit features a 1.0 m system length (Option 10) and is equipped with a miniature coaxial ClickLoc connector (Option 02) without a connector protector. The probe is designed for seamless integration with 3300 XL Proximitor sensors and extension cables. This configuration does not include hazardous area agency approvals (Option 00), making it suitable for standard, non-classified environmental installations.

Features

• 8 mm probe tip diameter for accurate displacement measurement
• 3/8-24 UNF probe thread for standard mounting interfaces
• 0.0 in unthreaded length configuration
• 4.7 in case length
• 1.0 m total system length
• Miniature coaxial ClickLoc connector (standard cable)
• No hazardous area approval required (Option 00)

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• General fluid-film bearing displacement analysis

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the 3300 XL system manual using the recommended Proximitor sensor settings. When installing in a machine, ensure the mounting bracket or hole is properly threaded and the probe is locked in place using a probe lock nut. Keep the cable routing clear of high-voltage lines and ensure all connections are tight and clean to prevent signal interference. If using extension cables, ensure the total system length matches the calibration of the Proximitor sensor.