330101-10-43-10-02-05: 3300 XL 8 mm proximity probe with a 3/8-24 UNF threaded body, featuring a 1.0 in unthreaded length (Option 10) and a 4.3 in overall case length (Option 43). This configuration operates with a 1.0 m total length (Option 10), a miniature coaxial ClickLoc connector on standard cable (Option 02), and includes CSA, ATEX, and IECEx agency approvals (Option 05) for hazardous areas.
This non-armored probe configuration contrasts with armored sibling variants like the 330102 series, which offer additional mechanical protection in abrasive environments. It utilizes a standard cable without the FluidLoc option, making it suitable for clean or enclosed installations where fluid migration along the cable is not a factor. It connects to a 3300 XL Proximitor sensor and an extension cable to form a complete eddy-current measurement system.
| Option / Segment | Code on This SKU | Description / Meaning |
|---|---|---|
| Orderable Part Number | 330101-10-43-10-02-05 | 3300 XL 8 mm proximity probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 10 | 1.0 in (25.4 mm) |
| B - Overall Case Length Option | 43 | 4.3 in (109.2 mm) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 05 | CSA, ATEX, IECEx Approvals |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330101-10-43-10-02-05 |
| Probe Diameter | 8 mm |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Nominal DC Resistance (R-probe) | 7.59 +/- 0.50 ohms (center to outer conductor) |
| System Compatibility | 3300 XL monitoring system; Proximitor 330180 series; 3500 rack when interfaced through appropriate I/O modules |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Cable Type | 75 ohm triaxial fluoroethylene propylene (FEP) insulated probe cable |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Max Rated) | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) at probe lead to extension cable connectors |
| Operating Temperature (Standard) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Probe Pressure Seal | Viton O-ring design to seal differential pressure between probe tip and case |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
Mount the probe with the appropriate probe gap per system calibration, ensuring correct physical clearance around the probe tip to prevent side-loading or crosstalk. Route the integrated cable using proper shielding and grounding practices to minimize external electrical noise. Observe the minimum cable bend radius of 25.4 mm during installation. Ensure the coaxial connection is tight (finger-tight for gold ClickLoc connectors) and insulated from machine ground unless otherwise specified.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330101-10-43-10-02-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330101-10-43-10-02-05: 3300 XL 8 mm proximity probe with a 3/8-24 UNF threaded body, featuring a 1.0 in unthreaded length (Option 10) and a 4.3 in overall case length (Option 43). This configuration operates with a 1.0 m total length (Option 10), a miniature coaxial ClickLoc connector on standard cable (Option 02), and includes CSA, ATEX, and IECEx agency approvals (Option 05) for hazardous areas.
This non-armored probe configuration contrasts with armored sibling variants like the 330102 series, which offer additional mechanical protection in abrasive environments. It utilizes a standard cable without the FluidLoc option, making it suitable for clean or enclosed installations where fluid migration along the cable is not a factor. It connects to a 3300 XL Proximitor sensor and an extension cable to form a complete eddy-current measurement system.
| Option / Segment | Code on This SKU | Description / Meaning |
|---|---|---|
| Orderable Part Number | 330101-10-43-10-02-05 | 3300 XL 8 mm proximity probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 10 | 1.0 in (25.4 mm) |
| B - Overall Case Length Option | 43 | 4.3 in (109.2 mm) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 05 | CSA, ATEX, IECEx Approvals |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330101-10-43-10-02-05 |
| Probe Diameter | 8 mm |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Nominal DC Resistance (R-probe) | 7.59 +/- 0.50 ohms (center to outer conductor) |
| System Compatibility | 3300 XL monitoring system; Proximitor 330180 series; 3500 rack when interfaced through appropriate I/O modules |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Cable Type | 75 ohm triaxial fluoroethylene propylene (FEP) insulated probe cable |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Max Rated) | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) at probe lead to extension cable connectors |
| Operating Temperature (Standard) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Probe Pressure Seal | Viton O-ring design to seal differential pressure between probe tip and case |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
Mount the probe with the appropriate probe gap per system calibration, ensuring correct physical clearance around the probe tip to prevent side-loading or crosstalk. Route the integrated cable using proper shielding and grounding practices to minimize external electrical noise. Observe the minimum cable bend radius of 25.4 mm during installation. Ensure the coaxial connection is tight (finger-tight for gold ClickLoc connectors) and insulated from machine ground unless otherwise specified.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
