Option 00 (0.0 in unthreaded length), Option 35 (3.5 in overall case length), Option 10 (1.0 m total length), Option 02 (ClickLoc coaxial connector, standard cable), and Option 00 (no agency approvals required) specify the physical build of the 330102-00-35-10-02-00 armored proximity probe. This eddy-current transducer probe features a threaded 3/8-24 UNF steel body and integral stainless steel armor to shield the coaxial cable against mechanical damage, cutting, and abrasion in harsh rotating machinery environments. It pairs with a 3300 XL Proximitor sensor and standard extension cable to form a complete machinery protection system for measuring shaft vibration and axial position.
Unlike non-armored variants like the 330101, this armored 330102 model includes a protective stainless steel conduit over the standard FEP-insulated coaxial cable. The 0.0-inch unthreaded length provides maximum thread engagement for deep-well mounting setups, while the 3.5-inch case depth fits standard threaded entries. This specific configuration excludes agency approvals (Option 00), making it suitable for general-purpose, non-hazardous industrial areas where explosion-proof or intrinsically safe ratings are not required.
| Option / Segment | Code on This SKU | Meaning from Datasheet |
|---|---|---|
| Orderable Part Number | 330102-00-35-10-02-00 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, with armor |
| A - Unthreaded Length Option | 00 | 0.0 inches (0.0 mm) |
| B - Overall Case Length Option | 35 | 3.5 inches (88.9 mm) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) |
| D - Connector and Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required / No approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330102-00-35-10-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Case Thread Size | 3/8-24 UNF-2A |
| Unthreaded Length | 0.0 inches (0 mm) |
| Overall Case Length | 3.5 inches (88.9 mm) |
| Total Probe Length | 1.0 meter (3.3 feet) |
| Cable Armor | Flexible stainless steel armor (FEP-insulated coaxial core) |
| Outer Armor Outside Diameter | 7.67 mm (0.302 in) |
| Probe Tip Material | PPS (polyphenylene sulfide) |
| Connector Type | Miniature male coaxial ClickLoc connector |
| Target Material | AISI 4140 steel (standard calibration target) |
| Recommended Gap | 1.27 mm (50 mils) |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Nominal DC Resistance (Rprobe) | 7.59 ohms +/- 0.50 ohms (center conductor to outer conductor) |
| System Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) when paired with 3300 XL Proximitor |
| Dimensions | 150 mm x 150 mm x 45 mm (H x W x D) (Coiled / shipping package size) |
| Weight | 0.32 kg (320 g) |
| Connector Component | Connection Type | Torque Specification |
|---|---|---|
| Miniature Male Coaxial ClickLoc | Slide and click coaxial interface | Finger tight (do not use pliers unless connecting non-XL connectors) |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330102-00-35-10-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 320g
Dimensions: 150 mm x 150 mm x 45 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 00 (0.0 in unthreaded length), Option 35 (3.5 in overall case length), Option 10 (1.0 m total length), Option 02 (ClickLoc coaxial connector, standard cable), and Option 00 (no agency approvals required) specify the physical build of the 330102-00-35-10-02-00 armored proximity probe. This eddy-current transducer probe features a threaded 3/8-24 UNF steel body and integral stainless steel armor to shield the coaxial cable against mechanical damage, cutting, and abrasion in harsh rotating machinery environments. It pairs with a 3300 XL Proximitor sensor and standard extension cable to form a complete machinery protection system for measuring shaft vibration and axial position.
Unlike non-armored variants like the 330101, this armored 330102 model includes a protective stainless steel conduit over the standard FEP-insulated coaxial cable. The 0.0-inch unthreaded length provides maximum thread engagement for deep-well mounting setups, while the 3.5-inch case depth fits standard threaded entries. This specific configuration excludes agency approvals (Option 00), making it suitable for general-purpose, non-hazardous industrial areas where explosion-proof or intrinsically safe ratings are not required.
| Option / Segment | Code on This SKU | Meaning from Datasheet |
|---|---|---|
| Orderable Part Number | 330102-00-35-10-02-00 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, with armor |
| A - Unthreaded Length Option | 00 | 0.0 inches (0.0 mm) |
| B - Overall Case Length Option | 35 | 3.5 inches (88.9 mm) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) |
| D - Connector and Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required / No approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330102-00-35-10-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Case Thread Size | 3/8-24 UNF-2A |
| Unthreaded Length | 0.0 inches (0 mm) |
| Overall Case Length | 3.5 inches (88.9 mm) |
| Total Probe Length | 1.0 meter (3.3 feet) |
| Cable Armor | Flexible stainless steel armor (FEP-insulated coaxial core) |
| Outer Armor Outside Diameter | 7.67 mm (0.302 in) |
| Probe Tip Material | PPS (polyphenylene sulfide) |
| Connector Type | Miniature male coaxial ClickLoc connector |
| Target Material | AISI 4140 steel (standard calibration target) |
| Recommended Gap | 1.27 mm (50 mils) |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Nominal DC Resistance (Rprobe) | 7.59 ohms +/- 0.50 ohms (center conductor to outer conductor) |
| System Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) when paired with 3300 XL Proximitor |
| Dimensions | 150 mm x 150 mm x 45 mm (H x W x D) (Coiled / shipping package size) |
| Weight | 0.32 kg (320 g) |
| Connector Component | Connection Type | Torque Specification |
|---|---|---|
| Miniature Male Coaxial ClickLoc | Slide and click coaxial interface | Finger tight (do not use pliers unless connecting non-XL connectors) |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
