Bently Nevada 330103-00-05-90-02-00 3300 XL 8 mm Proximity Probe

Description

330103-00-05-90-02-00: 3300 XL 8 mm proximity probe configured with 0.0 in (0 mm) unthreaded length (Option 00), 0.5 in (13 mm) case length (Option 05), 9.0 m total length (Option 90), miniature clickLoc connector with standard cable (Option 02), and no hazardous area approvals (Option 00). This probe is designed for use in 3300 XL 8 mm transducer systems, providing non-contacting eddy-current displacement measurement for monitoring critical rotating machinery.

The 3300 XL system components are designed to be fully interchangeable with previous 3300-series 8 mm components, allowing for seamless upgrades. The 330103 configuration provides a 9.0 m cable option to suit specific installation requirements where shorter cable lengths are insufficient, maintaining signal integrity and accuracy within the transducer loop.

Features

• Option 00: 0.0 in unthreaded length
• Option 05: 0.5 in case length
• Option 90: 9.0 m total system length
• Option 02: Miniature ClickLoc connector with standard cable
• Option 00: Not required (no agency approvals)
• Compatible with 3300 XL Proximitor sensors and 3300 XL extension cables
• Provides linear output for vibration and position monitoring

Applications

• Shaft vibration and axial position measurement
• Steam turbines and gas turbines
• Centrifugal compressors and pumps
• Hydroelectric generators
• High-speed rotating equipment in petrochemical and power generation facilities

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is mounted in a location free from excessive mechanical vibration and secure the cable using standard routing practices to prevent abrasion. Verify the gap voltage settings at the Proximitor sensor output during installation to ensure the probe is within its linear operating range. Avoid kinking the coaxial cable and maintain the minimum bend radius requirements during installation.