1 / 3

Bently Nevada 330103-00-07-10-01-05 3300 XL 8 mm Proximity Probe

SKU 330103-00-07-10-01-05

In stock

12-month warranty
Free returns within 30 days

Manufacturer: Bently Nevada
Product No.: 330103-00-07-10-01-05
Origin United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 0.32 kg
Dimensions: 150 mm x 150 mm x 30 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months

Product Description

Description

330103-00-07-10-01-05 is a Bently Nevada 3300 XL 8 mm proximity probe featuring a metric M10 x 1 thread, an unthreaded length of 0 mm (Option 00), an overall case length of 70 mm (Option 07), a 1.0 m total length (Option 10), standard cable with a miniature coaxial ClickLoc connector and connector protector (Option 01), and CSA, ATEX, and IECEx hazardous area approvals (Option 05).

This specific metric-threaded configuration without armor contrasts with the 330104 armored series, offering a lighter and more flexible routing profile. The inclusion of a ClickLoc connector protector (Option 01) shields the coaxial connection from environmental contaminants, while Option 05 permits deployment in hazardous environments globally.

Features

Metric M10 x 1 thread design matches standard metric mechanical installation taps.
Option 00 specifies a 0 mm unthreaded section, meaning the probe casing is fully threaded for maximum depth adjustment.
Option 07 provides a 70 mm overall case length for specific projection depth requirements.
Option 10 supplies a 1.0 m standard coaxial cable length to complete the transducer loop with standard extension cables.
Option 01 integrates a miniature coaxial ClickLoc connector along with a pre-installed fluorosilicone connector protector.
Option 05 provides native compliance with CSA, ATEX, and IECEx international hazardous area certifications.
PPS (polyphenylene sulfide) tip material provides structural protection in industrial fluid environments.
AISI 303 or 304 stainless steel case construction offers mechanical durability.

Applications

Hydroelectric, steam, and gas turbine rotor vibration monitoring.
Centrifugal compressor shaft position and radial vibration tracking.
Industrial gearbox input and output shaft movement monitoring.
Large electric motor and generator fluid-film bearing shaft position measurement.
Keyphasor reference and speed measurement systems.

Ordering Information

Option Segment	Code on This SKU	Description / Meaning
Base Model	330103	3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor
A - Unthreaded Length Option	00	0 mm (fully threaded body)
B - Overall Case Length Option	07	70 mm overall case length
C - Total Length Option	10	1.0 meter (3.3 feet) total length
D - Connector and Cable-Type Option	01	Miniature coaxial ClickLoc connector with connector protector, standard cable
E - Agency Approval Option	05	CSA, ATEX, IECEx Approvals (intrinsically safe and non-incendive)

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330103-00-07-10-01-05
Sensor Type	Non-contact eddy current displacement sensor
Thread Size	M10 x 1 metric thread
Unthreaded Length	0 mm
Overall Case Length	70 mm
Total Probe Length	1.0 meter (3.3 feet)
Cable and Connector Type	Standard coaxial cable with miniature gold-plated coaxial ClickLoc connector and pre-installed connector protector
Calibrated Linear Range	0.25 to 2.3 mm (10 to 90 mils)
Scale Factor (ISF)	7.87 V/mm (200 mV/mil)
Probe DC Resistance	7.59 Ohm +/- 0.50 Ohm
Tip Material	PPS (Polyphenylene sulfide)
Case Material	AISI 303 or 304 Stainless Steel (SST)
Maximum Rated Case Torque	22.6 Nm (200 in-lbf)
Recommended Case Torque	7.5 Nm (66 in-lbf)
Operating and Storage Temperature	-52 degC to +177 degC
Minimum Cable Bend Radius	25.4 mm (1.0 in)
Weight	0.32 kg
Dimensions (H x W x D)	150 mm x 150 mm x 30 mm (H x W x D)

Installation Guidelines

Thread engagement limit is 15 mm maximum for M10 x 1 threads to prevent binding.
Maintain minimum 25.4 mm (1.0 in) cable bend radius when routing the standard coaxial cable.
Finger-tighten the gold-plated ClickLoc coaxial connectors, then slide the connector protector in place.
Insulate probe-to-extension-cable connections with the provided connector protector to shield against moisture, conductive dirt, and turbine oil.
Set the probe gap to approximately 1.27 mm (50 mils) or -9 Vdc for radial vibration and position applications.

Compliance and Certifications

CSA (Intrinsically Safe and Non-Incendive)
ATEX (Group II 1 G Ex ia IIC T4/T5 Ga)
IECEx (Ex ia IIC T4/T5 Ga)
CE Mark compliant
RoHS compliant

Shipping & Returns

Global Express Shipping

Standard Delivery: 4–6 business days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our technical warranty.

FAQ

What does the -01 connector and cable option signify for this probe?

The -01 option indicates a miniature coaxial ClickLoc connector equipped with a pre-installed fluorosilicone connector protector on standard coaxial cable.

What thread type does the 330103 proximity probe use?

This probe uses an M10 x 1 metric thread, making it suitable for metric taps and mounting arrangements.

Is this configuration armored or unarmored?

The 330103 series probe is unarmored, offering standard coaxial cable flexibility for easier routing in clean machine internals compared to armored models.

What is the unthreaded length and case length of the 330103-00-07-10-01-05 probe?

This probe features an unthreaded length of 0 mm (Option 00) and an overall threaded case length of 70 mm (Option 07).

Which approvals are included with the -05 agency option?

The -05 option provides multi-agency certifications including CSA, ATEX, and IECEx for deployment in hazardous areas.

Reviews

330103-00-07-10-01-05

Stock & lead time on request

Call

1 3